Introduction:
Wire gabion net is composed of metal wire woven into angular net
(hexagonal net) assembled into a cage, because of the woven metal
wire similar to lead wire, so called wire gabion net. According to
the requirements of engineering design assembled into a box, and
loaded stone and other filling materials after connecting into one,
used as dike, roadbed protection, slope protection and other
projects.
Wire diameter is usually in the range of 2.0-4.0mm, wire gabion
steel wire tensile strength between 350-500mpa, galvanized quantity
is generally ≥ 245G /m2, wire gabion mesh edge diameter is
generally greater than the net surface diameter.
Lead wire gabion material classification:
1. Galvanized steel wire: the diameter of 2.0-4.0 mm high quality
low carbon steel wire, wire tensile strength is not less than 350
Mpa, wire surface using hot dip galvanized protection, wire surface
galvanized. The thickness of the protective layer is made according
to customer requirements, and the maximum amount of galvanizing is
500g/m2.
2. Zinc-5% aluminum mixed rare earth alloy steel wire :(also called
Galfan) steel wire, in recent years. In the international rise of a
new material, its corrosion resistance than the traditional pure
galvanized steel wire is more than 3 times higher than the amount
of material, diameter up to 2.0mm-4.0mm, tensile strength is not
less than 350Mpa.
3. Galvanized wire coated: high quality low carbon steel wire
coated with PVC protective coating on the surface of the wire. And
then woven into different specifications of lead wire gabion. This
PVC protective layer will greatly improve the protection of high
pollution environment, and through the choice of different colors,
so that it is integrated with the surrounding environment.
4. Zinc -5% aluminum mixed rare earth alloy coating: PVC coated on
the zinc -5% aluminum - mixed rare earth alloy wire surface, and
woven into different specifications of the hexagonal net. This PVC
protective layer will greatly improve the protection of high
pollution environment, and through the choice of different colors,
so that it is integrated with the surrounding environment.
Main product specifications:
| I specifications |
| Project | Length(m) | Highly(m) | Width(m) | Partition number |
| L×1×0.5 | 2/3/4 | 1 | 0.5 | 1/2/3 |
| L×1×1 | 2/3/4 | 1 | 0.5 | 1/2/3 |
| allowance tolerance | ±5% | ±5% | ±5% | |
| Ⅱ Aperture |
| Mesh type | D(mm) | Tolerance | Tensile strength of mesh surface |
| 8×10 | 80 | +16%/-4% | 30 |
| Ⅲ Technical parameters of steel wire |
| Wire type | With steel wire surface | terminal filament | Stranded wire |
| Diameter | 2.7 | 3.4 | 2.2 |
| Diameter tolerance | 0.06 | 0.07 | 0.06 |
| Minimum coating quantity | 245 | 265 | 230 |
| Tensile strength | 350-550 |
