1. The external rotor structure of the motor has high torque
density.
2. The motor adopts enclosed structure and the protection level
reaches IP65.
3. Optimizing the electromagnetic design to make the motor have
smaller slot torque,stable operation at low speed and high
eficiency.
4. Using high performance permanent magnet material, design
overload capacity (≥250%)
5. The military grade electronic components was used in encoder for
higher impact resistance.
6. The lead wire adopts silicon rubber high temperature shielded
wire, which has good high temperature resistance and
anti-interference ability.
7. Class-F Insulation Level, Make Motor Have Higher Life.
8. Compact structure design can further reduce the overall size of
door operator.
1. The external rotor structure of the motor has high torque
density.
2. The motor adopts enclosed structure and the protection level
reaches IP65.
3. Optimizing the electromagnetic design to make the motor have
smaller slot torque,stable operation at low speed and high
eficiency. .
4. Using high performance permanent magnet material, design
overload capacity (≥2509%)
5. The military grade electronic components was used in encoder for
higher impact resistance.
6. The lead wire adopts silicon rubber high temperature shielded
wire, which has good high temperature resistance and
anti-interference ability.
7. Class-F Insulation Level, Make Motor Have Higher Life.
8. Compact structure design can further reduce the overall size of
door operator.
| Model | PM6182047 |
|---|
Dimensions(mm) | 160x160x67.5 | Rated Voltage(V) | 200 | Rated Current(A) | 1.0 |
|---|
Rated Wattage(W) | 90 | Rated Torque(N·m) | 3.5 | Rated Speed(rpm) | 240 |
|---|
Rated Frequency(Hz) | 40 | Poles | 20 | Working Type | 40%(S3 on 6s off 9s) |
|---|
Classification | IP65 | Insulation Grade | F | Encoder Classification | A/B/C/D/E |
|---|
Pulley | Tooth Outline | 5M |
|---|
Tooth Number | 28/19/16 |
|---|
Width of pulley(mm) | 17/13 |
|---|
| Note: | 1.Installation size:130x130mm
2.Matching pulley:HTD5M-16,HTD5M-26,HTD8M-22
3.High efficiency, multi-directional installation, dustproof and
oil proof, high temperature resistance, long life, F grade
insulation grade, IP65 protection grade
4.Insulation Resistance≥100MΩ(冷态Cold)
5.The whole machine pressure resistance 1500V, 1min, no breakdown
6.No-load noise value≤48dB
7.No-load level & vertical vibration≤0.45mm/s |
|---|
