316L Stainless steel coil ,stainless steel plate used
inArchitectural decoration, luxury doors
Stainless steel coil specification :
| Product name | stainless steel plate ,stainless steel sheet |
| Grade | 201,202,304,304L,309,
309S,310S,316,316L,316Ti,317L,321,347H,409,409L,410, 410S,
420(420J1, 420J2), 430, 436, 439, 441, 444, 446 etc. |
| Thickness | 1mm-6mm(cold rolled),3mm-150mm(hot rolled) |
| Width | 1000mm,1219mm(4feet),1250mm,1500mm,1524mm(5feet),1800mm,2000mm or
as your requirements. |
| Length | 2000mm,2440mm(8feet),2500mm,3000mm,3048mm(10feet),5800mm, 6000mm or
as your requirements. |
| Technology | cold rolled,hot rolled |
| Delivery time | 7-25 days after your deposit, or according the quantity |
| Package | Water proof paper+metal pallet+Angle bar protection+steel belt or
as requirements |
| Applications | Architectural decoration, luxury doors, elevators decorating, metal
tank shell, ship building,decorated inside the train, as well as
outdoor works, advertising nameplate, the ceiling and cabinets,
aisle panels, screen, the tunnel project, hotels, guest houses,
entertainment place,kitchen equipment, light industrial and so on. |
The chemical composition of grade 304 Stainless Steel is outlined
in the following table :
| C | Mn | Si | P | S | Cr | Ni | N | |
| 304 | 0.07max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 10.5 | — |
| 304L | 0.03max | 2.0max | 0.75max | 0.045max | 0.03max | min: 18.0 max: 20.0 | min: 8.0 max: 12.0 | 0.10 max |
| 304H | min: 18.0 max:20.0 | min: 8.0 max: 10.5 | min: 0.04 max:0.10 | 0.75 max | 2.0 max | 0.045 max | 0.03 max | 0.10 max |
The mechanical properties of grade 304 Stainless Steel Plates are
displayed in the following table:
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness |
| Rockwell B (HR B) max | Brinell (HB) max |
| 304 | 515 | 205 | 40 | 92 | 201 |
| 304L | 485 | 170 | 40 | 92 | 201 |
| 304H | 515 | 205 | 40 | 92 | 201 |
| 304H also has a requirement for a grain size of ASTM No 7 or
coarser. |
Physical properties of 304 grade stainless steel in the annealed
condition:
| Grade | Density(kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (μm/m/°C) | Thermal Conductivity (W/m.K) | Specific Heat 0-100°C (J/kg.K) | Electrical Resistivity (nΩ.m) |
| 0-100°C | 0-315°C | 0-538°C | at 100°C | at 500°C |
| 304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
Stainless steel coil introductions :
Stainless steel has smooth surface, high plasticity, toughness and
mechanical strength, and is resistant to the corrosion of acid and
alkali gas, solution and other media. It is an alloy steel, which
is not easy to rust, but it is not absolutely rusty.It has general
corrosion resistance similar to unstable ni-cr304. It has high
temperature oxidation resistance, but the oxidation rate will be
affected by internal factors such as exposure environment and
product morphology. The total heat transfer coefficient of metal
depends on the thermal conductivity of metal, but also on other
factors. Stainless steel keeps the surface clean, so it can conduct
electricity. Metals with higher thermal conductivity have better
heat dissipation than other metals
Stainless steel coil application:
1. Buildings And Constructions
Floor Decks, Ceilings, Duct Work, Roofing, Siding, Sashes, Beams,
Fences, Verandas, Shutters,
Awnings,
Partitions, Indoor Decorations, Pipes, Ventilators, Sheds,
Culverts.
2. Transportation
Body Pane, Air Cleaners, Oil Filters, Fuel Tanks, Containers,
Highway Barriers.
3. Appliances
Light Fittings, Washing Machines, Dryers, Coolers, Vending
Machines, Water Heaters, Stoves,
Refrigerators, Freezers, Tool Boxes.
4. Agriculture
Barns, Dryer Panels, Animal Houses, Hoppers. Bar Supporters,
Irrigation Systems, Green Houses.
5. Others
Furniture And Office Equipment, Entertainment Machines, Car Ports,
Garden And Storage Sheds
Loading pictures of stainless steel coil :
FAQ:
Q: Can you send samples?
A: Of course, we can send samples to all parts of the world, our
samples are free.
Q: What product information do I need to provide?
A: You need to provide the grade, width, thickness, coating and the
number of tons you need to purchase.
Q: What are the shipping ports?
A: Any port in China.
Q: About product prices?
A: Prices vary from period to period due to cyclical changes in the
price of raw materials.
Q: What are the certifications for your products?
A: We have ISO 9001, SGS, EWC and other certifications.
Q: How long does your delivery time take?
A: In general, our delivery time is within 20-25 days, and may be
delayed if the demand is extremely large or special circumstances
occur.
Q: Can I go to your factory to visit?
A: Of course, we welcome customers from all over the world to visit
our factory. However, some of the plants are not open to the
public.
Q: Does the product have quality inspection before loading?
A: Of course, all our products are strictly tested for quality
before packaging, and unqualified products will be destroyed.
Q: How to pack the products?
A: The inner layer has a waterproof paper outer layer with iron
packaging and is fixed with a fumigation wooden pallet. It can
effectively protect products from corrosion during ocean
transportation.
