Adulteration Dipstick Diagnosis Strips Convenient Urine Test Kits
DAT-111 Biochemistry Reagents
The Urine Adulteration Test Dipsticks are a semi-quantitative color
comparison screen for the detection of Creatinine, Nitrite,
Glutaraldehyde, pH, Specific Gravity, Oxidants and Pyridinium
Chlorochromate in human urine.
Each of the plastic Dipsticks contains six chemically treated
reagent pads. One minute following the activation of the reagent
pads by the urine specimen, the colors that appear on the pads can
be compared with the printed color chart on the canister. The color
comparison provides a semi-quantitative screen for Creatinine,
Nitrite, Glutaraldehyde, pH, Specific Gravity, Oxidants and
Pyridinium Chlorochromate in human urine, which can help assess the
integrity of the urinespecimen.
How to use?
Allow the Dipstick, urine specimen, and/or controls to reach room
temperature (15-30ºC) prior to testing.
1. Remove the Dipstick from the closed canister and use it within
one hour. Immediately close the canister tightly after removing the
required number of Dipstick(s). Completely immerse the reagent
areas of the Dipstick in fresh, wellmixed urine and immediately
remove the Dipstick out of the urine specimen to avoid dissolving
the reagents. See illustration 1 below.
2. Hold the Dipstick in a horizontal position and immediately bring
the edge of the Dipstick into contact with an absorbent material
(e.g. a paper towel) to avoid mixing chemicals from adjacent
reagent areas and/or soiling hands with urine. See illustration 2
below.
3. Read results in 1 minute by comparing the reagent areas to the
corresponding color blocks on the Color Card. Hold the Dipstick
close to the color blocks and match carefully. Do not interpret
results after 4 minutes.
| Cat. No. | Product Description | Specimen | Format | Kit Size | Cut-Off | Status |
|
| DAT-111 | Adulteration Dipstick | Urine | Dipstick | 25 T | / | CE |
