C-reactive protein (CRP) Test Cassette, diagnosis of inflammatory
condition ,Fluorescence Immunoassay Test
Introduction
RP Test Cassette is based on Fluorescence Immunoassay for the
quantitative determination of C-reactive protein (CRP) in
serum,plasma or whole blood as an aid in the evaluation of
infection, tissue injury and inflammatory disorders along with
measurement of high sensitivity CRP (hs-CRP) for evaluation of
acute coronary syndromes (ACS). The test result is calculated by
Fluorescence Immunoassay Analyzer.
| Principle: | Fluorescence Immunoassay |
| Specimen: | WB/S/P |
| Reading Time: | 3 Minutes |
| Storage Temperature: | 4-30℃ |
| Cut-Off: | 1ug/mL, 10ug/mL |
| Format: | Cassette |
| Certificate: | CE |
| Pack: | 10T/25T |
| Shelf Life: | 2 Years |
【PERFORMANCE CHARACTERISTICS】 1. Accuracy The test deviation is≤±15%. 2. Assay Range and Detection Limit Assay Range: 0.1 – 50 ng/mL Minimum Detection Limit (Analytical Sensitivity): 0.1 ng/mL 3. Linearity range 0.1~50 ng/ml , R≥0.990 4. Precision CV≤15% |
Fast Result (3 minutes) Simple Operation (Less Training Required) Objective (Results Read by Analyzer) Stringent Quality Control Insure High Accuracy User-friendly (Simple Plug & Play Operation) High Efficiency (Both STAT Testing and Batch Testing) |
A rapid test for the diagnosis of inflammatory condition by
detecting C-reactive protein qualitatively in whole blood, serum or plasma CE
certified
Applications:
The CRP Rapid Test Cassette (Whole Blood/Serum/Plasma) is a rapid
chromatographic immunoassay for the qualitative detection of human
CRP in whole blood, serum or plasma as an aid in the diagnosis of
inflammatory condition. The cut-off of the test is 10 μg/ml.
Description:
C-reactive Protein (CrP) in patient’s sera has been found in
association with acute infections, necrotic conditions and a
variety of inflammatory disorders. There is a strong correlation
between serum levels of CrP and the onset of the inflammatory
process. Monitoring the levels of CrP in patient’s sera indicates
the effectiveness of treatment and the assessment of patient
recovery. It is used in particular to differentiate bacterial
infections from virus infections.
How to use?
Bring tests, specimens, buffer, and/or controls to room temperature
(15-30°C) before use.
1. Remove the Test Cassette from its sealed pouch, and place it on
a clean, level surface. For best results, the assay should be
performed within one hour.
2. Open the tube with the diluted sample .Transfer 3 drops of
(approx. 120ul) mixed specimens to sample well. Start the timer.
3. Wait for the colored lines to appear. The result should be read
at 5 minutes. Do not interpret the results at 10 minutes.
