Cycloidal pinwheel gearbox Cycloidal gearbox Manual gearbox RV -
40E
Cycloidal gear reducer has solid shaft output, hollow shaft output
and contract disk hollow shaft output,which can be installed
horizontally , vertically. Cycloidal Gearbox is made of high
strength quality alloy steel through quenching and possesses high
efficiency and long life gear .Othermore,Cycloidal gear reducer can
bear large axial and radial load.Features is low in run noise, high
in reliability, compact and so on.
Product Application
Cycloid reducer is a cycloid needle teeth meshing planetary
transmission principle drive models, is an ideal transmission has
many advantages, versatile, and can be both positive and negative
operation.
Perfect for the machinery and equipment of following industry:
• Power Plant Equipment
• Metallurgical Industry
• Metal Forming Machinery
• Petrochemical Industry & Mining Machine
• Hoisting Machinery
• Construction Industry
• Environmental Protection Industry
• Cable Industry
• Food Machinery
Product Feature
• Single stage drive with reduction ratio 1:87, high effciency.
• Input shaft and ourput shaft are in the same axis, so it's
compact in structure. .
• Cycloid gear with high overlap coefficient, steady the machine
and lower the noise.
• The reducer is made by bearing steel, it's has a long sevice
life.
PRODUCT CHARACTERISTICS
High Speed Ratio and High Efficiency
Single-stage transmission can achieve a deceleration ratio of 1:87,
and the efficiency is over 90%. If multi-stage transmission, the
deceleration ratio is larger.
Compact structure and small volume
Because the planetary transmission principle is adopted, the input
shaft and the output shaft are on the same axis, so the structure
is compact and the volume is small.
Smooth operation and low noise
Cycloidal pin teeth have many meshing teeth, large overlap
coefficient and smooth mechanism, which limits vibration and noise
to a minimum.
Reliable use and long service life
Because the main parts are bearing steel, high strength is obtained
by quenching treatment (HRC58-62), and rolling friction is used in
some transmission contacts, which is durable and has long service
life.
