Standard Testing Room Lower Energy Consumption Precision Air Cooling System

Product Introduction

The development of the Internet and information technology has brought about a continuous increase in the amount of data processing and storage. This growth has also led to a continuous increase in the thermal density of the data center and brought about dynamically changing load demands at different time periods. However, most of the traditional data center cooling systems have fixed cooling capacity or partially adjustable cooling capacity, which leads to the inability to match the load demand of the equipment room during operation, which brings some problems. According to this situation, Coolnet has developed the latest precision air conditioner, which can adjust the temperature and humidity according to the internal environment of the data center, which can be widely used in large, medium and small data centers.

Application Range

• Medium and large switch rooms and mobile computer rooms
• Computer room and electronic information system room (IDC)
• High-tech environment and laboratory
• Industrial control room and precision machining equipment
• Standard testing room and calibration center

High reliability

High reliability is fully reflected in: EVO intelligent control system; high-efficiency variable frequency compressor; high-efficiency and high-reliability EC fan system; high-efficiency, high-pressure and large-area V-shaped evaporator; high-reliability variable frequency speed regulation owl type outdoor fan; high efficiency and low noise Centralized condenser outdoor unit, etc.

High energy saving

The high energy saving rate is fully reflected in: EVO intelligent control system;high-efficiency EC fan system; high-efficiency humidification system; high-efficiency variable frequency speed owl-type outdoor fan; small footprint; full frontal maintenance

High efficiency

The large-area V/A type evaporator coil is used, and the structure is more compact. The copper tube with internal thread and the punched fin have higher heat transfer efficiency than the unit using the traditional coil. The large-area evaporator structure coil can make the cycle of the refrigeration system match the refrigeration load more fully, and the air flow through the surface of the coil is more stable, which minimizes the noise of the unit so as to ensure high air volume and high sensible heat ratio.

Fan:

Use the efficient and low-noise EBM backward tilt centrifugal wind motorized balance test to ensure long life, high energy efficiency, low energy consumption and low noise operation. Compared with equipment with the same air volume in the industry, the power consumption is the lowest.

Condenser:

The air-cooled condenser is made of marine grade corrosion-resistant materials, has outstanding rigidity and anti-corrosion functions, and is accustomed to various environmental conditions. Fully adjustable speed electric fans are used to achieve energy saving and low noise.

Compressor:

Use a scroll compressor with a high energy efficiency ratio. The reduction of the moving parts of the scroll compressor reduces the noise and sensation of the unit a lot; the compression process of the compressor is continuous and stable; the rotation viewpoint of the exhaust process of the compressor exceeds 540 degrees; there is no heat exchange during the inhalation and compression process; In the process of compaction, the direction of refrigerant airflow is not changed; the airflow loss is reduced; the scroll compressor does not need high and low pressure valves; the volume loss of the valve is reduced, and the patented dynamic and static scroll separation technology can effectively avoid liquid shock; launch The current is low. The energy efficiency ratio of similar compressors is the highest, reaching 3.4.