Medical Using Injection Molding Process Mechanical Dental Chair
Dental Equipment
Doctor's seat can be raised and lowered, the lowest chair position
is 440mm, the stroke is 120mm, the backrest is tilted at 25°, the
backrest is ±8, and the backrest can be independently adjusted up
and down.
Phone configuration
1 SINOL fiber optic high-speed mobile phone
2. 1 imported high-speed mobile phone
3. 1 set of imported low-speed mobile phones
4. Three-purpose guns (two straight and two bent)
Performance and technical parameters
| Frequency | 50HZ±1HZ |
| Rated voltage | 220V±10% |
| Air source | pressure0.5-0.6MPA |
| Water source | Water pressure 0.2-0.4MPA |
Dental chair, fully computer controlled operation, with automatic
reset, spitting position, and special memory functions. The main
control board and the auxiliary control board are equipped with
computer touch buttons; the power system adopts imported Danish
LINAK linear mute motor, and the whole process only needs to be
tilted 9 seconds, maintenance-free; the lowest seat position:
410mm, the highest seat position 750mm, the load is greater than
135Kg; the original imported leather fabric is pressed and formed
at one time, soft, comfortable and wear-resistant; built-in floor
box; machine-chair interlocking device, backrest and chair The body
is equipped with a safety protection device; the dental chair has
an angle compensation function; the headrest can be adjusted and
locked arbitrarily; the wide-body dental chair, imported Italian
high-quality dental chair leather cushion is seamlessly pressed
into a shape, the leather cushion and the body are connected by a
buckle ; The dental chair is designed with double armrests, and the
outer armrests can be opened as needed.
