Advantage:
◆ Powerful, compatible with FX3G/FX3U/FX3S PLC, high processing
speed.
◆ Special encryption, prevent illegal reading thoroughly. 8-bit
encryption, 12345678 as password can thoroughly prevent reading of
ladder logic program.
◆ Clock supported, rechargeable battery adopted.
◆ Support Mitsubishi programming protocol/MODBUS protocol/RS
protocol/BD board protocol, easily realize PLC interconnection and
communication with external devices.
◆ Flexible use. More specifications and batches can be customized
according to customer requirements.
◆ The PLC is compatible with Mitsubishi programming software, and
the HMI uses TK series human-machine interface programming software
mView.
Parameter:
Display | Dimension | 134*102*34mm |
Cutout size | 120*94mm |
Type | 4.3"TFT |
Feature | 60K-color resistive touch screen, supports portrait display |
Memory | RAM | 64MB |
ROM | NOR Flash 8MB |
CPU | 32bit CPU 408MHz |
I/O | DI/DO | Max 12DI/12DO |
DI/DO level | Input: Passive NPN, public terminal isolated Transistor output: Low level NPN, COM connect to negative; Relay
output: Normally open dry contact |
DO type and load | Relay MR/MOS tube, MOS tube: 2A/point, 4A/4 point COM, 5A/12 point
COM; MR: 2A/point, 5A/12 point COM. |
Analog I/O (optional) | Max 4AI/2AO |
AI type (optional) | Thermocouple E/E_/K/K_/S/S_/T/T_/J/J_ / PT100/ PT1000/ NTC10K/
NTC50K/ NTC100K/ 0~10V/ 0~5V/ 0~20mA/ 4~20mA/ mixed |
AO type (optional) | 0~10V /0~5V/ 0~20mA/ 4~20mA/ mixed |
High-speed function | High-speed counting | Single phase 6 channel 60KHz, or 2 AB 60KHz + 1 AB 10KHz, or 2 ABZ 60KHz + 1 AB phase 10 KHz |
High-speed pulse | 8 channels, Y0-Y3 is 100KHz, Y4-Y7 is 10KHz. High-speed counting + high-speed pulse < 480KHz |
Connection | HMI | Type-C HMI download port (can download PLC program through the USB
penetrating function), RS232 port |
/ |
PLC | 1 TYPE-C, 1 RS232 (program port) |
1 RS485 or 2 RS485 COM ports (one of which is changed from the
default RS232 port); 1 WIFI (occupy default RS232 port) |
Software | HMI | Coolmay mView HMI Programming Software |
PLC | Compatible with Mitsubishi GX Developer 8.86 and WORKS 2 |
Introduction of each interface and indicator
POWER: power indicator, the light is on when the power is
connected.
RUN: PLC running status indicator, the light is on when the PLC is
running.
COM: HMI and PLC communication status indicator, the light is on
when the two communicate.
Power terminal: the positive and negative poles of the DC24V
switching power supply are connected to the DC24V and 0V of the
power terminal respectively.
PLC programming port: two PLC programming ports (Mini type B USB
programming port or Type-C/RS232), PLC program can be downloaded
through 232 programming cable or USB cable.
HMI programming port: download the touch screen configuration
program.
USB interface: mainly can be directly inserted into a U disk with a
FAT 32 file system, or a mouse (under development)
