P/N 453564271711 PHiliphhilip MX400 Mx450 MX Series Patient Monitor
Mainboard
When multiple patients and priorities demand your attention, having
comprehensive patient information at a glance can make a real
difference. Your monitoring also needs to change with patient
acuity and be able to withstand the rigors of in-hospital
transport.
The PHiliphhilip IntelliVue MX450 and MX500 monitor a wide range of
flexible vital signs and relevant patient data, while giving you
portability when you need it. Whether you are in an ICU or a
subacute ward, the MX450 and MX500 monitors provide you with the
same high standard of patient monitoring as the rest of the
IntelliVue family.
It's important to find what you need right away. The IntelliVue
MX450 and MX500's 12" touchscreen makes operation simple. You'll
also recognize the familiar, easy-to-use interface common across
the IntelliVue monitoring portfolio.
Whether you're examining a patient in a bright environment or
letting a patient rest with dimmed room lights, you don't need to
adjust your monitor's display brightness. Display with ambient
light sensor that automatically adjusts screen brightness for
readability in virtually any lighting environment
These monitors also feature built-in advanced clinical solutions
that provide tools to aggregate and visualize complex clinical data
and its interactions. Multiple streams of information are brought
together in one intuitive view.
The IntelliVue MX450 uses a multi-measurement module with basic
measurement capabilities. The IntelliVue MX500 adds the ability to
add additional measurement modules.
Maintenance Task and Test Schedule
| Maintenance and Test Schedule | Frequency |
| Monitor Tests |
| Safety checks. Selected tests on the basis of IEC 60601-1 | At least every two years, or as needed after repairs to remove or
replace the power supply, or when the monitor has been dropped. |
| Monitor Maintenance |
| Check ECG synchronization of the monitor and defibrillator (only if
hospital protocol requires use of monitor during defibrillation) | At least once every two years, or as needed. |
| MX600/700/800 only Replace backlight (integrated displays only) | 25,000 - 30,000 hours (about three years) of continuous usage, or
as needed. |
| Multi-measurement Module and Module Tests |
| Performance assurance for all measurements not listed below | At least once every two years, or if you suspect the measurement
values are incorrect |
| Multi-measurement Module and Module Maintenance |
| NBP calibration | At least once every two years, or as specified by local laws. |
| Microstream CO2 calibration and performance test | At least once a year or after 4000 operating hours. |
| Mainstream and sidestream CO2 calibration and sidestream flow check
(M3014A) | At least once a year, or if you suspect the measurement values are
incorrect. |
Mainboard
The motherboard contains the CPU, which includes the
graPHiliphhilipics processing unit and USB controller. Main memory,
system FPGA, system controller including watchdog, and various
power supplies are located on this board. In addition, the board
contains the MSL interface, recorder interface, ECG Out hardware
and various other interfaces.
System information is stored in serial EEPROM to support automatic
configuration of the operating system at boot time.
