Test procedure
Perform the test only when Hie reagent has equilibrated to room
temperature (18'C~26°C) to avoid affecting the accuracy of the
experimental results.
1. Instrument preparation:① Turn on the power of the fluorescence
analyzer, select the detection mode (quick test/standard test);②
Read the reagent ID chip;③ Select the sample type and test items;④
The specific operation of the instrument is performed in accordance
with the instruction manual of the corresponding model instrument.
2. Take the sample to be tested and die required reagents out of
storage conditions and equilibrate to room temperature.
3. Unpack the aluminum foil pouch, place the test card horizontally
on the table and mark it.
4. Draw 50µL, serum and plasma or 80uL whole blood sample into the
sample hole, then add 50µL sample diluent, and time it.
5. Test:
① Standard test:
After the sample is added, insert the test card into the instrument
and click "start test". The instrument automatically counts the
time. After the reaction countdown of 15 minutes is over, the
instrument automatically performs the test, and records, reads and
prints the test results.
② Quick test:
After adding the sample, time 15 minutes with a timer. When the
time is up, insert the test card into the instrument, and click
"Start Test". The instrument automatically performs the test, and
records, reads and prints the test results. If the test card fails
to be tested in time within 15-20 minutes, it will be deemed as
invalid test, and the sample need to be retested with a new test
card.
Note: Use a clean pipette or tip for every sample to avoid
cross-contamination
