LT1070 LT1071 PMIC Chip TO220 5V Switching Regulator IC For Battery Upconverter

LT1070 LT1071 TO220 Linear IC by components Forward Converter Switching Regulator IC

The LT1070/LT1071 are monolithic high power switching regulators. They can be operated in all standard switching configurations including buck, boost, flyback, forward, inverting and “Cuk”. A high current, high efficiency switch is included on the die along with all oscillator, control and protection circuitry. Integration of all functions allows the LT1070/LT1071 to be built in a standard 5-pin T0-220 power package. This makes it extremely easy to use and provides “bust proof” operation similar to that obtained with 3-pin linear regulators. The LT1070/LT1071 operate with supply voltages from 3V to 60V, and draw only 6mA quiescent current. They can deliver load power up to 100W with no external power devices. By utilizing current mode switching techniques, they provide excellent AC and DC load and line regulation. The LT1070/LT1071 have many unique features not found even on the vastly more difficult to use low power control chips presently available. They use adaptive antisat switch drive to allow very wide ranging load currents with no loss in efficiency. An externally activated shutdown mode reduces total supply current to 50µA typical for standby operation. Totally isolated and regulated outputs can be generated by using the optional “flyback regulation mode” built into the LT1070/LT1071, without the need for optocouplers or extra transformer windings.

Applications:

■ Logic Supply 5V at 10A

■ 5V Logic to ±15V Op Amp Supply

■ Off-Line Converter Up to 200W

■ Battery Upconverter

■ Power Inverter (+ to –) or (– to +)

■ Fully Floating Multiple Outputs

■ For Lower Current Applications, See the LT1072

Features:

Wide Input Voltage Range: 3V to 60V

■ Low Quiescent Current: 6mA

■ Internal 5A Switch (2.5A for LT1071)

■ Very Few External Parts Required

■ Self Protected Against Overloads

■ Operates in Nearly All Switching Topologies

■ Shutdown Mode Draws Only 50µA Supply Current

■ Flyback Regulated Mode Has Fully Floating Outputs

■ Comes in Standard 5-Pin TO-220 Package

■ Can be Externally Synchronized

() is a world leader in the design, manufacture, and marketing of a broad portfolio of high performance analog, mixed-signal, and digital signal processing (DSP) integrated circuits (ICs) used in virtually all types of electronic equipment. Since our inception in 1965, we have focused on solving the engineering challenges associated with signal processing in electronic equipment. Used by over 100,000 customers worldwide, our signal processing products play a fundamental role in converting, conditioning, and processing real-world phenomena such as temperature, pressure, sound, light, speed, and motion into electrical signals to be used in a wide array of electronic devices.

We accepts your orders for full range of products and provides comprehensive technical support.

Product Categories

Audio Products
Development Boards, Kits, Programmers
Integrated Circuits (ICs)
Maker/DIY, Educational
Power Supplies - Board Mount
RF/IF and RFID
Test and Measurement
Circuit Protection
Discrete Semiconductor Products
Isolators
Networking Solutions
Power Supplies - External/Internal (Off-Board)
Resistors
Crystals, Oscillators, Resonators
Filters
Kits
Optoelectronics
Prototyping, Fabrication Products
Sensors, Transducers

Part number list :

Product Categories
Audio Products
Development Boards, Kits, Programmers
Integrated Circuits (ICs)
Maker/DIY, Educational
Power Supplies - Board Mount
RF/IF and RFID
Test and Measurement
Circuit Protection
Discrete Semiconductor Products
Isolators
Networking Solutions
Power Supplies - External/Internal (Off-Board)
Resistors
Crystals, Oscillators, Resonators
Filters
Kits
Optoelectronics
Prototyping, Fabrication Products
Sensors, Transducers

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of  Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of  Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.