CLRC63201T RFID READER IC 13.56MHZ 32SO ISO Integrated circuits CLRC63201T0FE112

CLRC63201T RFID READER IC 13.56MHZ 32SO ISO Integrated circuits CLRC63201T0FE112

ISO Integrated circuits CLRC63201T0FE112 Description:

RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V

Environmental & Export Classifications

ISO Integrated circuits CLRC63201T0FE112 Description:

RFID Reader IC 13.56MHz ISO 14443, ISO 15693, MIFARE SPI 3.3V ~ 5V

The CLRC632 is a highly integrated reader IC for contactless communication at 13.56 MHz. The CLRC632 reader IC provides:

• outstanding modulation and demodulation for passive contactless communication

• a wide range of methods and protocols

• a small, fully integrated package

• pin compatibility with the MFRC500, MFRC530, MFRC531 and SLRC400 All protocol layers of the ISO/IEC 14443 A and ISO/IEC 14443 B communication standards are supported provided:

• additional components, such as the oscillator, power supply, coil etc. are correctly applied.

• standardized protocols, such as ISO/IEC 14443-4 and/or ISO/IEC 14443 B anticollision are correctly implemented

Specification:

Application :

Electronic payment systems

Identification systems

Access control systems

Subscriber services

Banking systems

Digital content systems

General information:

Highly integrated analog circuitry for demodulating and decoding card/label response

Buffered output drivers enable antenna connection using the minimum of external components

Proximity operating distance up to 100 mm

Supports both ISO/IEC 14443 A and ISO/IEC 14443 B standards

Supports MIFARE dual-interface card ICs and the MIFARE Mini, MIFARE 1K, MIFARE 4K protocols

Contactless communication at MIFARE higher baud rates (up to 424 kBd)

Supports both I-CODE1 and ISO/IEC 15693 protocols

Crypto1 and secure non-volatile internal key memory

Pin-compatible with the MFRC500, MFRC530, MFRC531 and the SLRC400

Parallel microprocessor interface with internal address latch and IRQ line

SPI compatibility  Flexible interrupt handling

Automatic detection of parallel microprocessor interface type

64-byte send and receive FIFO buffer

Hard reset with low power function

Software controlled Power-down mode

Programmable timer

Unique serial number

User programmable start-up configuration

Bit-oriented and byte oriented framing

Independent power supply pins for analog, digital and transmitter modules

Internal oscillator buffer optimized for low phase jitter enables 13.56 MHz quartz connection

Clock frequency filtering

3.3 V to 5 V operation for transmitter in short range and proximity applications

3.3 V or 5 V operation for the digital module

Images :

Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT).

The Mission Of  Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.

The corporate Philosophy Policy of  Angel Technology Electronics Co is Innovation,Not limited by the inhereent thinking,always looking for new ways to meet the needs of the market.So We have specialized in providing customers with one-stop service of electronic components, PCB and SMT since 2006, helping end customers to efficiently complete the full project including BOM list procurement process etc.

Angel Technology Electronics Co Has always been Customer Driven Rather than Opportunity Driven. Meaning- Angel Tech Will Always Choose Path That is the best For Long Term Relationship With Customer Over Short Term View. It Is Why We Have One Of The Highest Customer Retention Scores Of China Based Distributors.

Prioritizes client satisfaction:

Because of our clients are at the heart of how we work,At Angel Technology Electronic Co, our goal is to provide customers with electronic components supply,PCB production, SMT assembly one-stop service.

IInnovation and creativity:
We believe that innovation is fundamental to our success and we take particular pride in regularly working closely with industry innovators and our clients to set new standards. In recent years, Angel Technology Electronics co have also started collaborating with more and more corporations to explore new technologies in smart home and PMIC.

Inventory management:
Angel Technology Electronics co provides a third-party warehousing and professional IT inventory management software for customers to achieve seamless docking. The ownership of parts can only be transferred when the customer uses parts.

Angel Technology Electronic's incoming parts have undergone rigorous inspection, and the products are stored in standard anti-static, anti-humidity, anti-high temperature, and the stock are regularly tested to make the parts safe.

Packaging transportation standard :
The parts are tested for performance during shipment, and the packaging must be waterproof, moisture-proof and shock-proof. At the same time, Angel Technology Electronics cooperates with a number of international first-class freight companies to ensure that the parts of first- and second-tier cities can be delivered at that day, and arrive the next day. The goods of third-tier cities and remote areas can be delivered at that day and arrive within two days to ensure that customer.

Angel Technology Electronics Co have been passionated about electronic components distribute and integrated solution provider since 2006. We are also a PCBA manufacturer with our own manufacotry who can better serve for customers of smart home, communication, industry, automotive electronics and medical electronics etc.