Beryllium Copper Rod C17200 (Alloy 25) Length 1000mm By Quality
ASTM B196
Product Normal Description:
Product Name: Beryllium copper rod
Grade: C17200 (Alloy 25)
Standard: ASTM B196
State: A(TB00),1/2H (TD02), H(TD04),AT(TF00),HT(TH04)
Typical Application: used for low maintenance bearings and bushings
Product Brand: CUBERYLLIUM®
| Beryllium Copper Rods |
| Description | Size(mm) |
C17200 Beryllium Copper Rods Alloy 25 ASTM B196 Quality | Dia. | Length |
| 6.5 | 1000 |
| 16 | 1000 |
| 18 | 1000 |
| 19 | 1000 |
| 20 | 1000 |
| 25 | 1000 |
Chemical Composition of CuBe2 (UNS.C17200) Beryllium Copper Alloys
(CUBERYLLIUM ®-172):
Product Grade: CUBERYLLIUM ®-172(UNS. C17200)
Beryllium(Be): 1.80-2.00%
Cobalt(Co) + Nickel(Ni): 0.20% Min
Cobalt(Co) + Nickel(Ni) + Iron(Fe): 0.60% Max
Lead: 0.02% Max
Copper(Cu): Balance
Note: Copper plus additions equal 99.5% Minimum.
Beryllium copper alloy C17200 is a material with good corrosion
resistance, rich in ductility before age hardening treatment, and
increased in fatigue resistance and conductivity after age
hardening treatment.
Typical Physical Properties of CuBe2 (UNS.C17200) Beryllium Copper
Alloys (CUBERYLLIUM ®-172):
| Density (g/cm3): | 8.36 |
| Density before age hardening (g/cm3): | 8.25 |
| Elastic Modulus (kg/mm2 (103)): | 13.4 |
| Thermal Expansion Coefficient (20 °C to 200 °C m/m/°C): | 17 x 10-6 |
| Thermal Conductivity (cal/(cm-s-°C)): | 0.25 |
| Melting Range (°C): | 870-980 |
Mechanical and Electrical Properties of CuBe2 (UNS.C17200)
Beryllium Copper Rod:
| Temper(*) | Diameter | Heat Treatment | Tensile Strength ksi | Elogation Percent (Min) | Electrical Conductivity Percent IACS | Hardness Rockwell B or C Scale |
|---|
| A(TB00) | ALL SIZE | / | 400~600 | 30 | 15~19 | B45~85 |
| 1/2H(TB04) | 5~40 | / | 550~700 | 10 | 15~19 | ＞B78 |
H(TD04)
| 5~10 | / | 660~900 | 5 | 15~19 |
＞B88
|
| ＞10~25 | / | 620~860 | 5 | 15~19 |
| ＞25 | / | 590~830 | 5 | 15~19 |
| AT(TF00) | ALL SIZE | 3 hr 320°C | 1100~1380 | 2 | 22~28 | C35~42 |
| HT(TH04) | 5~10 | 2 hr 320°C | 1200~1550 | 1 | 22~28 | C37~45 |
| ＞10~25 | 1150~1520 | 1 | 22~28 | C36~44 |
| ＞25 | 1120~1480 | 1 | 22~28 | C35~44
|
Fasterners Applications of CuBe2 (UNS.C17200) Beryllium Copper
Alloy (CUBERYLLIUM ®-172):
| Product Category | Product | Reason Category | Reason |
| Fasteners | Roll Pins | Corrosion Resistance | Corrosion Resistance |
| Roll Pins | Mechanical Properties | Fatigue Resistance |
| Roll Pins | Mechanical Properties | Very High Strength |
| Screws | Corrosion Resistance | Corrosion Resistance |
| Screws | Creep Properties | Creep Resistant |
| Screws | Mechanical Properties | Very High Strength |
| Screws | Softening Resistance | Resistance to Thermal Softening |
| Washers | Corrosion Resistance | Corrosion Resistance |
| Washers | Mechanical Properties | Very High Strength |
Product Photos:
FAQ:
Q1: Could you produce Beryllium Copper strip by Mill Hardened
process.
A1: Yes, we could produce AM(TM00), 1/2HM(TM01).HM(TM04) XHM(TM06)
XHMS(TM08).,we are the only factory could do harden strip in China.
Q2: What’s the advantages the Beryllium Copper of CUBERYLLIUM®.
A2: 1: The Biggest Coil weight could be reach 1200kg/Coil
2: We are the only one who melting by Vacuum semi-Continuous
Furnace.
3: Surface further polishing for top clients.
Q3: Why you melting by Vacuum semi-Continuous Furnace.
A3: Could be get the Cast ingot without gas,smaller segregation,
Grain Refinement
Q4: What's the payment terms?
A4: We accept T/T, L/C, Paypal etc. It can be negotiated when the
amount is different.
