2S160-15 G1/2'' Stainless Steel Solenoid Valve For Water Air

2S160-15
2S: 2 Positon 2 Way Solenoid Valve. Solenoid valve has 2 pipe connections, an inlet called the cavity port and an outlet called the body orifice port. When the valve is energized the plunger opens allowing media to flow through the valve in the cavity port and out the body orifice port.Turn off the power. The orifice closes and flow through the valve stops.
160: The Aperture of Flow Rate is 16 mm
15:Joint Pipe Bore is G1/2 Inch Female Thread

Technical Data of 2W & 2S Solenoid Valve:

Main dimension of 2W & 2S Series Solenoid Valves:

2S160-15 1/2'' 2 Way NC SS 304 Water Solenoid Valve on YouTube:

The difference between Normally Close and Normally Open Solenoid Valve

Normally open solenoid valve
Normally open solenoid valve is closed when the solenoid coil is powered, and the normally closed solenoid valve is open when the solenoid coil is off. If the solenoid valve is required long-term opening, the normally open solenoid valve will be the ideal choice. If the solenoid valve is required long-term opening or close, the bistable solenoid valve is more suitable. As for the voltage, AC (380V, 240V, 220V, 24V) and DC (110V, 24V) is applicable for the normally open solenoid valve.

Normally open solenoid valve applies to the actuator that using steam as heat medium and automatically control temperature. normally open solenoid valve can make two-position automatic control and remote control to the steam heater, radiator, dryer and other steaming plants. Normally open solenoid valve has wide applications, including dyeing, textile, printing and dyeing, food, medicine, tobacco, cement product, petrochemical industry, metallurgy and etc.

Normally closed solenoid valve
Normally closed solenoid valve means closed when the solenoid coil is powered, and the solenoid valve is open when the solenoid coil is off. Normally closed solenoid valve apply for international standard voltage include AC 380V, 240v, 220v, 24v or DC 110V, 24V.

Focus on your demands, Offer you best solution:

√ Contact us if some points you have doubt
√ Contact us if somewhere need to change
√ Contact us if not the one you are looking for
√ Contact us if you are doing designing

Welcome to your any question and inquiry!

* Since the company's inception, we are dedicated to providing high quality products and service to our customers. With focusing on our customers' demands, at before production we discuss technical points according to applications with customers to reduce mistake and save cost for both sides. During production, we use high precision CNC machine, machining center to control dimensions and improve productivity. At beginning and mid of machining, our senior inspectors check quality regularly by recording data on documents as per ISO9001 management system. Before shipment, our staff make testing and complete inspection one piece by one piece to ensure the products without defect when reached our customer's hands.

* Ningbo Brando Hardware Co., Ltd will offer you best service with fast response, let's make the fluid control application more widely and smartly.

Product Categories:

1. Solenoid Valve
2. Solenoid Coil
3. Solenoid Armature
4. Solenoid Coil Connector
5. Solenoid Valve Timer
6. Pulse Valve
7. Valve Diaphragm
8. Pulse Controller
9. Refrigeration Valve
10. Pneumatic Valve
11. Pneumatic Fitting
12. Pneumatic Cylinder
13. Pneumatic Filter Regulator Lubricator
14. Pneumatic Vibrator
15. Ball Valve
16. Butterfly Valve
15. and so on