Smooth High Hardness Zirconia Mortar Abrasion Resistant

Advanced grinding, smooth, abrasion resistant, high hardness zirconia mortar

Description:

Zirconia mortar is mainly used for grinding and analyzing a small number of samples in the laboratory. It is used for grinding solid substances or mixing powdered solids.

Application method:

Wash and dry the mortar, and then put the grinding material into the bowl. First cover the mouth of the bowl with the left hand, and gently crush the coarse material with the right hand glass pestle, and then grind. Until the fineness is reached, the grinding material is poured out from the mouth and continues to grind after sifting the coarse grain. If you want to make a paste, you can also use a mortar, the method is the same as above, but because of the large contact surface of fine particles after grinding, the dissolution speed is increased, after grinding, the yan distillate water is directly added in the bowl, to be adjusted into a paste by the tip of the tip, and finally washed with distilled water, the washing liquid is also poured into the container.

Application of Advanced grinding, smooth, abrasion resistant, high hardness zirconia mortar:

Ultrafine grinding equipment, fine chemical industry, electronic paste, semiconductor, new energy, nano new materials, medical instruments, precision casting, structural ceramics, refractory materials, electronic communications, sensitive ceramics, petrochemical industry, aerospace, machinery manufacturing, optical fiber connector, battery materials and other high-precision end fields.

Technical Parameters:

Advantages:

1. The product has no crack, no impurity and strong resistance to wear.
2. The product has high gloss and strong corrosion resistance, and can be used in acid grinding materials.
3. High purity and hardness, which meet the quality and technical standards.

Advisories and Precautions:

1. In the process of use, special care should be taken to avoid grinding substances with excessive hardness and contact with hydrofluoric acid.
2. When grinding, the mortar should be placed on an object that is not easy to slide, and the pestle should be kept vertical. Large pieces of solids should only be crushed, not pounded with a pestle, as this will damage the mortar and pestle or spill solids out. Explosive materials should only be lightly crushed, not ground. To grind substances that are corrosive to the skin, cover the mortar with a thick paper or plastic sheet, then make a hole in the center, insert a pestle and grind again. The amount of solids in the mortar should not exceed one third of its volume.

More Picture:

Suzhou Manyoung Materials Co., Ltd, lies in famous tourist city, Suzhou City. It is only two hours from Shanghai to our factory by vehicle. Depending on advantageous geographical position、the excellent talents and broad markets, Manyong materials is committed to be a high-tech enterprise in the areas of research and production of advanced ceramic materials and components.
Manyoung Materials specializes in manufacturing various grinding media、ceramic parts、associated polishing equipments.
With the development of modern industry, Manyoung materials provides customers with superior qualified grinding materials and machinery parts by adopting international advanced techniques and equipments and developing with famous universities . It is widely used for precision machinery、fine chemicals, electronics pastes、semiconductor equipments, new energy, nano-materials 、Instruments and other high - end areas.
In order to ensure the reasonable application,Manyoung provides the considerate technical service for the customers in the whole service before-sales 、on –sales,and after sales because of the specificity of its application area.
We insist on running our company in terms of quality、 innovation、 efficiency 、honesty、 service, based on experienced teams 、efficient management、 advanced technical level、 perfect service. You are welcome to our company to visit and negotiate business.