Anesthetic Workstation X50-12.1" TFT touch screen, with rotary
knob. Resolution 800 X 600.
Suitable for pediatric and adults
Tidal volume setting Optional 20~1500ml(optional 10-1600ml)
Friendly user interface
Sufficient modes of Ventilation: VCV, PCV, SIMV-V, Manual
Gas supply: O2 , N2O, Air
Optional: SIMV-P , CPAP/PSV , PRVC, SIMV-PRVC, BACKUP , O2 , ETCO2
, AGSS , Suction,AA
6 Tubes flowmeter more accurate and stable, auxiliary flowmeter Gas
system, Hypoxic guard system, ORC, O2, Flush
Vaporizer: Selectatec bar support 2 vaporizers
ACGO, 2 Yokes (O2 & N2O)
12.1" TFT touch screen, with rotary knob. Resolution 800 X 600.
System Specifications
| System Specifications |
| Description | Technical parameters |
| Machine |
| Size | 1410 × 950 × 650 (H × W × D) |
| Weight | Approximately 110kg |
| Maximum bearing weight of the top cover | 30kg |
| Display |
| Type | Color TFT (touch screen) |
| Size | 12.1 inches |
| Resolution | 600 × 800 pixels |
| Brightness | Not adjustable |
| LED indication |
| Alarm Indication | 8 (yellow, red, and when the senior and mid-level alarms occur
simultaneously, only red flashes on priorty) |
| AC power indicator | 1 (green) |
| Battery indicator | 2 (green and orange) |
| Audio instruction |
| Speaker | Alarm sounds, tone ,volume adjustable,alarm tone meet IEC60601_1_8
standards. |
| Control |
| Knobs | 1, Support clockwise / counterclockwise rotation and pressing
operation |
| Button | 4, Alarm pause, alarm reset, standby, back to the main screen. |
| Interface |
| Power supply | An AC power connector Three auxiliary output power interface |
| Equipotential | An equipotential ground |
| USB | 1 standard USB interface |
| Moving means |
| Roller | 4 castors, diameter 125mm |
| Brake castors | Two lockable front casters |
| Toolbox |
| Drawer | 200 × 392 × 398 (H×W×D) |
| Respiratory System |
| Bellows capacity | 1500mL |
| Absorber canister capacity | 1500mL |
| Connection | Suction / ACGO ports: standard OD 22mm, ID 15mm, tapered connector;
Exhalation ports: standard OD 22mm, ID 15mm, tapered connector.
Manual breathing bag port: diameter 22cm |
| System leaks | The system is not greater than 100ml/min leakage in any mode |
| System compliance | The loss due to the system’s internal compliance gas volume (manual
mode)as follows: |
| Adult mode | ≤ 4 mL / cmH2O, |
| pediatric mode | ≤ 3 mL / cmH2O |
| Resistance | Inspiratory < 0.6 kPa; Expiratory < 0.6 kPa |
| Real-time clock |
| Range | 2000 (00:00) ~ 2100 (23:59) |
| Accuracy | ± 1 minute |
| Display Resolution | 1 minute / month(at 21±3℃ under the conditions) |
| Use the Power | Independent power (Button battery)supply |
| Vaporizer |
| Technical Specification |
| Flow range | 0.2-15L/min |
| Connector type | Selected compatible, plug in, cage mount |
| Dosing methods | Pour-fil, Easy-fil, Quick-fil (Sevoflurane) |
| Working environment |
| Working temperature | +15℃ ~ +35℃ |
| Relative humidity | ≤93% |
| Atmospheric pressure range | 70kPa ~ 106kPa |
| Storage temperature | -40℃ ~ +65℃ |
| Anesthetic Concentration: | |
| 0~5.0%: | Isoflurane, Enflurane, Halothane |
| 0 ~ 8.0%: | Sevoflurane |
| Main technical parameters |
| Basic function | Disply:12” TFT, Touch screen Tidal Volum:20－1500ml(optional 10-1600ml) Fresh gas compensation pre-use check, Leakage testing and compliance compensation Electronic PEEP |
| Wave form |
| Loop | P-V,V-F,P-F |
| Paw-T, Flow-T,V-T |
| Optional | CO2-T ,Pleth ,AG |
| Trend |
| 24hours |
Gas supply Pressure Monitoring
| Gauge-Pipeline supply: O2, N2O, Air Optional :gauge-cylinder: O2, N2O(configured with Yoke option ) |
Monitoring Parameter
| Tidal Volume, MV, Frequency, I:E, Airway Pressure , Compliance,
Resistance.(optional :EtCO2,FiCO2,PHASEIN gas module for anesthetic
agent) |
| Application | Adult , pediatric and Infant |
| Vaporizer | two position |
| Gas supply | O2, N2O, Air |
Alternate O2(safety flow )
| Range:0 to 15 L/min Indicator : flow tube Indicator accuracy :±10% |
| Fresh gas flowmeter &mixer (electronic automatic control) |
| O2 | 0~15LPM |
| N2O | 0~12LPM |
| Air | 0~15LPM |
| Flow accuracy | ±10% of setting ±0.1/min |
| O2 concentration range | 21% to 100% O2 concentration |
| Accuracy | ±5% |
| Electronic mitting compensation | 0.5s(10%-90% flow step) |
| Compensation | Temperature and atmospheric pressure compensated to standard
conditions of 20C and 1013kpa |
| Hypoxic guard | Electronic |
| FiO2% | O2sensor |
| Auxiliary O2 supply | O2 Flow meter (O2: 0～15LPM) (Optional) |
| ACGO | Yes(optional) |
| Battery | NI-MH battery build in.>90mins |
| Yoke | Optional:O2, N2O |
| Cycle Absorber | Intergrade, bypass Design, heating system. |
| Setting Parameter |
| Description | Parameter |
| Tidal Volume | 20～1500 mL(optional 10-1600ml) |
| Frequency | 1～100 bpm |
| Tinsp | 0.1～10.0s |
| I:E | 4:1～1:10 |
| Pause | 0～60% |
| PEEP | OFF, 3～30 cmH2O |
| Psupp | 0～70 cmH2O |
| Pressure Control | 5～70 cmH2O |
| Flow Trigger | 0.5～20 L/min |
| Pressure Trigger | 0～20 cmH2O |
| Ramp | 0～2s |
| Expiratory Trigger | 5~80% |
| Monitoring Parameter |
| Description | Parameter |
| Tidal Volume Inspiration | 0～2500 mL |
| Tidal Volume Expiration | 0～2500 mL |
| MV | 0～60 L/min |
| MVspont | 0～60 L/min |
| Frequency | 0～100 bpm |
| Ratespont | 0～100 bpm |
| I:E | 9:1～1:99 |
| Ppeak | 0～100 cmH2O |
| Pmean | 0～100 cmH2O |
| PEEP | 0～100 cmH2O |
| Pplat | 0～100 cmH2O |
| Pmin | -20~100 cmH2O |
| O2% | 15～100% |
| Compliance | 0～300 mL/cmH2O |
| Resistance | 0～600 cmH2O/(L/s) |
| EtCO2 (Optional) | 0～13.3 % |
| FiCO2 (Optional) | 0～13.3 % |
| Anesthetic agent | Massimo gas module for anesthetic agent |
| Flow trigger | 0.5~20L/min |
| Pressure trigger | 0~20cmH2O |
| Ramp | 0~2s |
| Expiratory | 5~80% |
| Alarm Parameter |
| Description | Parameter |
| Tidal Volume |
| Upper limit | 30～2000 mL |
| Lower limit | OFF, 20～1500 mL |
| MV |
| Upper limit | 1～99 L |
| Lower limit | 0～98 L |
| O2% (Optional) |
| Upper limit | 22～100%,OFF |
| Lower limit | 20～99% |
| Airway Pressure |
| Upper limit | 10～99 cmH2O |
| Lower limit | 1～98 cmH2O |
| Frequency |
| Upper limit | 1～100 bpm |
| Lower limit | 0～99 bpm |
| EtCO2 (Optional) |
| Upper limit | 0.1～13.3 % ; |
| Lower limit | 0～13.2 %; |
| Environment specification |
| Description | Parameter |
| Work environment |
| Temperature | 10-40℃ |
| humidity | 5~95%,non-condensing |
| Environmental Pressure | 50~106kpa |
| Storage environment |
| Temperature | -20-55℃ |
| humidity | 10~95%,non-condensing |
| Environmental Pressure | 50~106kpa |
| Power Specifications |
| Description | Parameter |
| External AC power |
| Input Voltage | 100 - 240V |
| Input Frequency | 50/60Hz |
| Input Power | <150 VA |
| Internal Battery |
| Number of batteries | A battery pack |
| Battery Type | Nimh batteries |
| Rated battery voltage | 12VDC |
| Battery capacity | 4200mAh |
| Shutdown Delay | Less than 10min |
| Charging time | 4h |
About us
Beijing Siriusmed Medical Device Co., Ltd is among the top level
Manufactures of anesthesia machine and ventilators in China since
2013. Our main products are: Anesthesia machine, vaporizer, ICU
Ventilator, neonatal ventilator, and air compressors. With the
quality certificates of NMPA, ISO 13485, CE and BGMP, we offer the
whole OR & ICU solutions to the world. Right now we established the
long term ditributors, OEM & SKD partners in Germany, UK, U.S.
India, Brazil, Morocco ... etc more than 80 countries in the world.
Welcome to join us for the long term cooperation for our products:
anesthesia machine, anestheisa ventilator, vaporizer, ventilator,
air compressor and monitors... etc.
