Approved EN14683 TypeIIR Disposable Medical Black Face Mask With
Earloop For Hospital Use
Use Method:
- Hold the mask vertically and place the nose clip bar upper.
- Put the mask cling tightly to the face , ans nose clip bar to the
bridge of nose.
- Hang on the elastic to the ears, and adjust it according to the
user’s face .
- Adjust the nose clip bar according to user’s face.
- Make the test whether the mask wears tightly as the following
steps: Place your hands on the mask to confirm whether the mask is
worn in the correct position. If there is air flow around, please
tighten the nose clip bar. If air leaks from the edges, adjust the
elastic to make it fit better.
Specifications Of Black Face Mask:
| Item Name | Medical Use Black Face Mask |
| Art No. | A-31BLK |
| Material | Polypropylene+Meltblown+Polypropylene |
| Model | With earloop |
| Size | 17.5x9.5cm |
| Layer | 3ply |
| Color | Black |
| Sterilization | Non-sterile |
| Logo | Without logo |
| Age Group | For adult |
| Sample | Free sample |
| Application | Hospital, clinic, laboratory, pharmacy, etc |
Product Advantages:
- 3ply design ith earloop, easy to wear on and breathable
- Excellent filtration for bacteria and virus, good protective and
good use
- High quality material, non-irritating and non-toxic, provide
reliable and comfortable experience
- With adjustable nose clip and latex-free elastic rubber, it is
better for fit and no more tightness
How To Use:
1. Wash your hands before wearing a mask, or avoid touching your
hands with the inside of the mask while wearing the mask to reduce
the possibility of the mask being contaminated.
2. Distinguish the inside, outside, top and bottom of the mask,;
the printed side of the KN95 mask is the outside; the one end of
the metal strip/sponge strip is above the mask.
3. Make sure that the mask is as close to the face as possible. The
simple test method is: after putting on the mask, exhale hard, and
the air cannot leak from the edge of the mask.
4. When it is found that the mask is contaminated damage or
resistance change. The mask should be replaced in case of major
conditions.
Our Certificates:
Our Factory:
With over 18 years of regional manufacturering experience, advanced
equipment, from selecting the raw materials to the processing with
the imported materials, to testing product, a series of strict
management system and clean production environment, we can produce
any quantities as your needs, duplicate your existing package
design, and also create a package design that will uniquely brand
your company' product.
Ammex-Weida(Hubei) Health and Safety Products Co., Ltd specializes in the manufacture of disposable and non-woven series,
such as bouffant caps, face masks, shoe covers, boot covers, lab
coats, coveralls, oversleeves, etc.
Our Exhibition:
We've participated in many exhibitions, gained many valuable
experience and developed many clients, like 2014 in Russia and Arab, 2016 in Dubai, 2017 in Iran and Thailand,
2018 in Japan, 2019 in Germany and Korea, etc.
FAQ:
1.Q: What are your main products?
A: Our main products include disposable face mask, isolation gown,
coverall, lab coat, surgical gown, disposable cap, apron, shoe
cover, disposable gloves etc.
2.Q: Can you provide free samples?
A: Yes, we can. Free samples are available, but the postal fee should
be paid by your side.
3.Q: What certificates do you have?
A: We got the ISO13485, ISO9001,CE MDR certificate ,Type 5/6.
4.Q: Can you offer customized service, such as customized logo on the
product, customized inner packing and
carton?
A: Yes, we can offer customized service.
5.Q: Where is your factory located? How can I visit there?
A: Our factory is located in Xiantao (China's largest production base
of non-woven products), only 35 minutes train to Wuhan. And our
exporting department is in Wuhan. You can fly to Tianhe Airport and
we can arrange pick–up. You can visit our exporting department in
Wuhan first and then go to our factory in Xiantao. Clients from
home or abroad are warmly welcome to visit us!
