Automatic 2000 BPH linear 12-12-1 sparking water bottling plant
Rotary bottle washer
Principle:
This washer is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for rising for 1st hand PET or glass bottles.It is advanced in construction ,
steadily in performance, safe in operation , easy in maintenance
high in production efficiency, and the speed can be regulated
infinitively. The rinser is the ideal choice for drink factories of
small and middle size.
The bottles will be taken into rinser by conveyor, the dia plate
will turn each bottle to be caught by spring clamp, with driven
energy of motor, the spring clamps will go forward a circle along
main axis, the bottles will be reversed 180°,bottle mouths will be
facing to floor, and at the meantime, spray water value will be
open and clean pressure water will spray inside bottles, with the
water fall down, dirty inside bottles will be taken away. Then the
cleaned bottle will be turned 180°again and sent into next machine
station.
The whole machine is made of SUS304. The spring clamp is by Italian
design, can be slightly adjustable according to bottle neck size
difference and can protect bottle neck. And water spray system is
from American, make sure water spray averagely. Easy for clean and
maintenance.
Parameters:
| Rising heads: | 12 pcs |
| Capacity: | 0-3000BPH (each bottle rinsing time 4s) |
| Power: | 0.92KW |
| Dimension: | 1050*950*1700mm |
| Weight: | 700KG |
| Applicable bottle: | D∮50-100mm,H 50-350mm |
Balance pressure filler
This filler is developed on the basis of digesting and absorbing
advanced technology introducing from abroad and is with
international advanced level. It is mainly used for filling
gas-containing drink, such as aerated water, cola sparkling wine ,
fruit tea and so on .It is advanced in construction , steadily in
performance, safe in operation , easy in maintenance high in
production efficiency, and the speed can be regulated infinitively.
The filler is the ideal choice for drink factories of small and
middle size.
Main Technological data
| Model : | DG -12 |
| Production Capacity: | 1000-2000b/h |
| Bottle /standard: | Glass bottle , PET bottle , Pop-top can |
| Filling Pressure: | 0.2-0.3Mpa |
| Filling Temperature | 2-6 ℃ |
| Power: | 1.1kw |
| Overall Dimensions: | 1100×1050×1800 mm |
| Weight : | 1000kg |
Screw cap capping machine
Principle:
The machine is used for capping for plastic screw caps, it includes
auto cap loader and capping system 2 parts. Workers put bulk qty
caps into cap loader, the cap loader will unscramble caps
automatically and bring caps down in cap rail and then to capping
head. Cap loader can hold more than 200pcs of caps each time, it
will be convenient for adding caps often. When capping head catch
cap, it will go down to bottle mouth and finish capping.
The capping head is by Italian magnetic technique, it will protect
caps not to be destroyed. The capping correctness will be 99%. The
opposite caps will be deleted automatically. The capping head is an
separate part. Change cap is only need to change capping head, easy
for change and operation. The whole machine is made from SUS304,
long shelf time.
Parameters:
| Capping head: | 1 pc |
| Power: | 1.1KW |
| Dimension: | 1000*850*2000mm |
| Weight: | 600KG |
