Modle 223 Twin Screw Extruder Machine Components Barrels For Petrochemical Industry

QualityTwin Screw Extruder Machine Parts Screw Barrel For Petrochemical Industry

1. Brief introduction:

2. Equipment:

Our factory is state-of-the art and spans over 20,000 square meters. The factory houses more than 130 sets of different domestic and foreign high precision production equipment, with the degree of numerical control up to 95%.

All the barrel body and liner are produce by CNC Machines.

3. Inspection:

We have three coordinate detectors, two dimensional image measuring instruments, a metallographic analyzer, an ultrasonic flaw detector, an element analyzer and more than 10 kinds of advanced detection equipment, which guarantees its quality stability!

Before leaving the factory, barrels must pass the strict three-dimensional inspection and be issued the inspection report.

4. Range of work:

Diameter of 20mm-400mm and over

Example table:

6. Types of Barrels
Standard for classification: Design geometry Standard for classification: With inner or not
* Open barrel * Solid barrel
* Closed barrel * Barrels with inners
* Vent barrel * Combi barrel

7. Materials:

8. Packaging Delivery:

For the products are large, so we use wooden case with iron frame protection to pack.

Joiner Machinery Co.,Ltd is a professional enterprise of spare parts for twin screw extruder: Barrel & Screw Element & Shaft & Side Feeder.

It occupies 15600 square meters with over 100 staffs and  more than140 sets of advanced processing equipments in our plants.Such as the CNC thread grinding machine, the CNC screw milling,the CNC lathe,the CNC surface grinder,the CNC cylindrical grinder,the CNC sawing machine,the automatic deep hole grinding machine,the CNC lathe,the CNC surface grinder,the CNC cylindrical grinder,the CNC sawing machine,the laser marking machine,the vacuum quenching furnace,the vacuum tempering furnace and so on.Ultimately,We become one-stop manufacturer for all services and thereby ensure the good quality through the internal control.There are also some advanced testing equipments,such as the three coordinate measuring system,metallographic analyzer,the Tayer roughness meter,The Janpanese Mitutuyo height gauge,the CMM,the Rockwell hardness tester,Vickers hardness tester ,the three coordinate measuring system and some other advanced testing equipments.Which ensure the products 100% controllable.we have over 20 years of experience in supply and refurbishment for wear parts.

Supplied sample mapping and processing for overseas

-APV                         -KOBE                               -OMC

-Buhler                      -KraussMaffei                     -Theysohn

-Buss                         -Berstorff                           -Toshiba

-Clextral                     -Labtech                            -JSW

-Leistritz                     -Maris                               -Keya

-others

Inspection of screw element Barrels

Joiner will throughly inspect all parts of wear,Cracks,Imperfections,Straightness,and Concentricity.Joiner will rapair broken barrals,and other componets.Inspections need to be performed to determine the severity of damage and if reparation is an option.All conclusion are documented in detailed reports with respective Recommendations.

As Lao Ti said" a journey of a thousand miles begins with a single step"

Joiner always adhere the saying and devete to the field of extrusion for 20 years.We believe in the continuous improvement of pursuit of excellence to achieve win-win cooperation with our customers.

Welcome to visit our company,We believe that if you have visited our factory,you will choose Joiner Machinery.