UNID US-15-50 US Series Normally Closed High-Temperat Brass Control
Fluid Flow Water Solenoid Valve
PRODUCT DESCRIPTION
．US series is multiplex, pilot operated piston, conductive and
normally closed
(NC) 2/2 way solenoid valve.
．Availability of fluid type:steam, heavy oil
CAUTIONS:
．Minimum pressure to open:over 0.5~1kgf-c㎡
．Before pipelining, the pipe line must be very clean without any
contaminants or any other things not ought to be existed.
．To prolong the life time of the product, Y-line filter should be
installed in the front end of solenoid valve.
．AC voltage tolerance:±10%；DC voltage tolerance:±1%
．It should be installed horizontally；vertical installation is not
advisable.
Not Suitalbe For Fluid As Below:
．Liquid status when it is high temperature；solid status when it is
cool.
．Corrosive fluid
．Viscosity over 20cst
| MODEL | Waterproof DIN/flying lead Coil | NASS DIN Coil (IP65) | PIPE SIZE | CV | ORIFICE | FLUID TEMP | Operating Pressure kgf I cm' (bar) | | | Vacuum (Torr) | Dimension (mm) | Weight (kg) |
| Water | Air | Light oil | Gas | L | H | D |
| US-15 | | | 1/2” | 4 | 17mm | -5*C~ +185*C | | | 0.5~10 | 0.5~10 | | 82 | 125 | 58 | 1.6 |
| US-20 | | | 3/4" | 6 | 17mm | -5°C- +185*C | | | 0.5~10 | 0.5~10 | | 82 | 125 | 58 | 1.67 |
| US-25 | | | 1" | 12 | 22mm | -5*C~ +185"C | | | 0.5~10 | 0.5~10 | | 91 | 133 | 58 | 2.02 |
| US-35 | | | 1 1/4" | 18 | 30mm | -5"C~ +185'C | | | 1~10 | 1~10 | | 111 | 141 | 58 | 3.08 |
| US-40 | | | 1 1/2" | 22 | 30mm | -5*C- +185*C | | | 1~10 | 1~10 | | 111 | 144 | 58 | 3.1 |
| US-50 | | | 2" | 48 | 50mm | -5"C- +185*C | | | 1~10 | 1~10 | | 163 | 175 | 58 | 6.82 |
| PARTS | Coil | Tube | Spring | Core | Plug | Piston | Piston plug | Valve body |
| MATERIAL | Special copper wire (H class) | Stainless steel | Stainless steel | Stainless steel | PTFE +15%GF | Brass | PTFE | Cast BRONZE |
|
After-sales clause:
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems
happen, we hope to solve the problems with buyer through friendly
in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods,
buyer must provide photos or video and other evidence to seller for
identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those
damages coursed by shipping or Man-made damaged ). A 15% restocking
fee is
assessed for any products returned in "used" condition. And then we
will send a new
product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we
will resend a new product in buyer next order; if buyer don't plan
to make a new order in
the near term, buyer can pay the resend shipping cost and ask to
resend a new product. If
there is an issue with the products, please contact us– we will
solve it as soon as we get
your email.
