MGPM40-75Z Compact Guide Cylinder 1.0 MPa SMC MGP Series Air
Cylinder
| Specifications |
| Action | Double acting |
| Fluid | Air |
| Proof pressure | 1.5MPa |
| Max. operating pressure | 1.0MPa |
| Minimum operating pressure | ø12, ø16 | 0.12 MPa |
| ø20 to ø100 | 0.1 MPa |
| Ambient & fluid temperature | -10 to 60℃(No freezing) |
| Piston speed | ø12 to ø63 | 50 to 500 mm/s |
| ø80, ø100 | 50 to 400 mm/s |
| Cushion | Rubber bumpers on both ends |
| Lubrication | Non-lube |
| Stroke length tolerance | +1.5 mm 0 |
| Standard Stroke |
| Bore size (mm) | Standard stroke (mm) |
| 12, 16 | 10, 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250 |
| 20, 25 | 20, 30, 40, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400 |
| 32 to 100 | 25, 50, 75, 100, 125, 150, 175, 200, 250, 300, 350, 400 |
Mounting
Caution
1. Use cylinders within the piston speed range.
An orifi ce is set for this cylinder, but the piston speed may
exceed the operating range if the speed controller is not used. If
the cylinder is used outside the operating speed range, it may
cause damage to the cylinder and shorten the service life. Adjust
the speed by installing the speed controller and use the cylinder
within the limited range.
2. Pay attention to the operating speed when the product is mounted
vertically.
When using the product in the vertical direction, if the load
factor is large, the operating speed can be faster than the control
speed of the speed controller (i.e. quick extension). In such
cases, it is recommended to use a dual speed controller.
3. Do not scratch or gouge the sliding portion of the piston rod
and the guide rod.
Damaged seals etc. will result in leakage or malfunction.
4. Do not dent or scratch the mounting surface of the body and the
plate.
The flatness of the mounting surface may not be maintained, which
would cause an increase in sliding resistance.
5. Make sure that the cylinder mounting surface has a fl atness of
0.05 mm or less.
If the flatness of the workpieces and brackets mounted on the plate
is not appropriate, sliding resistance may increase. If it is diffi
cult to maintain a fl atness of 0.05 or less, put a thin shim ring
(prepared by user) between the plate and workpiece mounting surface
to prevent the sliding resistance from increasing.
Delivery
1. If the products we have in stock, we will send it out ASAP after
payment.
2. If the products which were customized, we will complete the
production within a specified period of time, and send it out the
first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNT
will be normal ways. If you require use of a courier, we can do it.
Serves time
0:00 - 23:59
From Monday to Sunday
After-sale Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some
unexpected problems happen, we hope to solve the problems with
buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days
after receiving the goods, buyer must provide photos or video and
other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one
year (not included those damages coursed by shipping or Man-made
damaged ). A 15% restocking fee is assessed for any products
returned in "used" condition. And then we will send a new product
to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD)
has quality problems, we will resend a new product in buyer next
order; if buyer don't plan to make a new order in the near term,
buyer can pay the resend shipping cost and ask to resend a new
product. If there is an issue with the products, please contact us–
we will solve it as soon as we get your email.
