ASTM B166 UNS N06600 Inconel 600 Nickel Alloy Round Bar Bright
Annealed
Yuhong Group is a well-known manufacturer and supplier of Inconel 600 round bar
ASTM B166 UNS N06600 in China. The tube is a nickel-chromium-iron
alloy.
The chemical composition of this nickel steel alloy is designed to
provide excellent resistance to many corrosive environments.
Inconel 600 is a standard engineering material with excellent heat
resistance and corrosion resistance. Inconel 601 also has high
strength and good workability, excellent metallurgical stability
and high resistance to carburization. Inconel 600 is hardened and
strengthened through a cold working process.
ASTM B166 round bars are widely used in a variety of applications
for different industrial uses. These products undergo various
tests, including hydraulic testing, to ensure leak-free
performance. Inconel 600 Round Bar and Inconel 601 Round Bar are a
nickel-iron-chromium alloy containing titanium, copper and
molybdenum. The chemical composition of Inconel 600 Round Rod and
Inconel 601 Round Rod is highly resistant to many corrosive
environments such as pitting, crevice corrosion, intergranular
corrosion and stress corrosion cracking. Inconel 600 round bar and
Inconel 601 round bar have good mechanical properties from medium
to high temperature. Inconel 600 round bar and Inconel 601 round
bar are hot worked from 1600 to 2150° F. The material has good
solderability in all conventional processes. Round bars are used in
a wide variety of industrial applications: from basic industries
such as sugar, paper, textile, dairy and engineering to more
complex fields such as oil and gas, petrochemical, chemical and
fertilizer, power generation and nuclear industries, etc.
Inconel Alloy 600 Round Rod is a nickel-chromium alloy rod
containing supplemental amounts of niobium, iron, molybdenum,
aluminum and titanium. Inconel 600 round bars are high strength,
heat treatable, good corrosion resistance, formability and
weldability. Inconel round bars are commonly used in valves,
fasteners, tubing and mandrels. The Inconel Bar has an excellent
low temperature and heating range. Common uses of Inconel 600 alloy
include deployment in gas turbines, sub-service ety valves,
aircraft engines, thrust reversers, and industrial fasteners
1.Material:
UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, N06696
ASTM B166 UNS N06600 Chemical Composition:
| Alloy | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 600 | 0.15 max | 1.00 max | 0.5 max | 0.015 max | 0.5 max | 6.0-10.0 | 72.0 min | 14.0-17.0 | - | - |
ASTM B166 UNS N06600 Mechanical Properties:
| Nickel Alloy | Tensile Stress | Yield Stress (0.2%Offset) | Elongation |
| 600 | Psi - 120,000 , MPa - 825 | Psi - 90,000 , MPa - 620 | 7-12% |
1.1 This specification covers nickel-chromium-iron alloys (UNS
N06600, N06601, N06603, N06690, N06693, N06025, N06045, and
N06696), nickel-chromium-cobalt-molybdenum alloy (UNS N06617), and
nickel-iron-chromium-tungsten (UNS N06674) alloy in the form of
hot-finished and coldworked rounds, squares, hexagons, rectangles,
and coldworked wire.
1.2 The values stated in inch-pound units are to be regarded as
standard. The values given in parentheses are mathematical
conversions to SI units that are provided for information only and
are not considered standard.
1.3 The following precautionary caveat pertains only to the test
methods portion, Section 12, of this specification: This standard
does not purport to address all of the ety concerns, if any,
associated with its use. It is the responsibility of the user of
this standard to become familiar with all hazards including those
identified in the appropriate Material ety Data Sheet
(MSDS) for this product/material as provided by the
manufacturer, to establish appropriate ety and health practices
and determine the applicability of regulatory limitations
prior to use.
