MAQUET Servo - I Servo - S Expiratory Cassette 6447960 Ventilator Parts

Ventilator Parts MAQUET Servo-i Servo-s Expiratory Cassette 6447960

► Brief Introduction

The exhalation gas delivery component and the PC1786 exhalation channel cassette are integrated into one part-the exhalation cassette, which can be easily disassembled for cleaning or exchange. Please refer to the Servo-i Ventilator System-User Manual.

The exhalation box can be interchanged between different servo-i systems. After replacing the exhalation cassette, a pre-use inspection is always required.

Expiratory Inlet

The exhalation inlet of the exhalation tube of the patient's respiratory system is 22mm/10mm tube connector. The inlet is designed to let the condensate drip out and allow a trap to collect the water. A bacteria filter can be connected to the exhalation inlet to protect the cassette record from contamination.

Heating foil

The electric heating foil is applied to the outside of the expiratory tube where the ultrasonic flowmeter is located. The purpose of the heating foil is to reduce condensation in the exhaled breath and maintain a stable temperature.

Ultrasonic flowmeter

An ultrasonic flowmeter is a device that measures the flow of expiratory gas, using ultrasonic technology and two ultrasonic transducers/receivers. The measurement process is controlled by the main block PC1784 exhalation channel.

The ultrasonic sound from the left transducer is reflected on the inner wall of the exhalation channel. The sound of the ultrasonic wave is received by the sensor on the right, which now acts as a receiver. The time from sending to receiving ultrasound in the downstream expiratory airflow was measured. Then, the right sensor (received in advance) emits ultrasonic sound upstream of the expiratory flow. The ultrasound is received by the left hand as a receiver. Measure the time from sending the upstream expiratory airflow to receiving the ultrasound. The time difference between the downstream and upstream time measurements provides flow information. The temperature sensor in the box measures the temperature of the exhaled air. This temperature measurement is also used to calculate expiratory flow.

► The exhalation cassette is a complete unit and cannot be disassembled. It contains the following parts:

• Exhalation inlet with moisture-proof device.
• PC1786 expiratory channel cassette tape.
• Ultrasonic flow meter.
• Heat the foil to maintain a stable temperature in the exhaled breath.
• Pressure sensor connection, included. Bacteria filter to connect the exhalation pressure sensor.
• Exhalation valve included. Valve membrane.
• Exhalation check valve.

The exhalation valve coil is installed under the exhalation box chamber and controls the valve membrane in the box.

The PC1786 in the exhalation box is electrically connected to the PC1784 exhalation channel through the PC1785 exhalation channel connector.

► Troubleshooting

A technical error that occurred while exhaling the cassette or communicating with the cassette. If the technical alarm expires the flow meter test. "Cassette power failure" and error code "Technical error in exhalation cassette"

Please kindly contact us, if you are interested in Ventilator Parts MAQUET Servo-i Servo-s Expiratory Cassette 6447960, Thank you!

China World Technology Medical Equipment Service Group is a company engaged in medical equipments/repair parts and accessories products trading company. The company was established in September 2005, has many famous enterprises at home and abroad (such as America USCO company) to establish a long-term friendly business relationship. Company mainly engaged in patient monitor and other medical machine products. Since its inception continue to absorb a variety of talents, improve product quality, improving staff quality, in order to grow their companies. Strict quality guarantee system and perfect management system, high-quality products after-sales service is our foothold in this, my company of "quality first, reputation first" principle, provide customers with quality and quantity of various types of products. Always uPHiliphold the "quality, integrity and pragmatic, motivated, service-oriented" business PHiliphilosoPHiliphy, and applies the company's management and operating among. The face of fierce competition, the company system is constantly being improved, relying on science and technology, continuously improve the technology content of products sold, for society, customers and companies to create a higher market value. Our company has been in good faith to create enterprises, to credit management market, has won a good reputation, also won the respect of their domestic counterparts.
Business strictly in accordance with relevant state laws, regulations and rules of the WTO requirements management according to law, actively participate in regional economic.Business prospects and good, the next time, our company will expand the scale of operation and steady development of corporate economic, sincerely seeking partners, good faith cooperation and seek common development, writing a new chapter in medical equipment field.