1. The printing table adopts to be supported by four parallel axes,
the height of table is adjusted by chain driven by hand wheel, so
that the stable degree and adjust properties can be increased. The
surface of the table is made of the stainless steel which make the
table is hard to scratch and distort, the plane degree of the table
is less than 0.20mm, which ensure to get the printing pattern much
more equal and clearer;
2. The printing speed reducer and printing knife rest are connected
by in-phase belt and guide line, which clean out the shake and
glide when the connection rods are connected and can get the
printing speed more consistent and stable;
3. The squeegee and ink return blade are controlled by four
cylinders and can be adjusted separately at infinite pressure, the
printing pressure is large and equal, which increase the service
life of the screen frame and the printing quality;
4. The printing is driven by frequency conversion timing which make
the run more stably and exactly; The printing course is controlled
by inductive switch, it can move quickly and locate on guide line,
the fixation mechanism of screen frame also can be adjusted
quickly, which reduce the time of exchanging frame and printing and
increase the work efficiency;
5. There is snap-off device, and the height of snap-off can be
adjusted, which ensure the printing precision and quality of
products;
6. The run of whole machine is controlled by the microcomputer. The
printing time and printing delay both can be adjusted and shown
instantly. The speed of printing and ink returning can be adjusted
quickly; There is the safe system of rise back urgently which to
protect the safe of worker.
