Our Services & Strength
1.The measuring medium must be compatible with 304 stainless steel
and nitrile rubber.
2.If possible, the electrical connection of the pressure
transmitter should be as vertical as possible. Measurement of dry
gas pressure except indoors and in dry conditions;
3.When the pressure vessel being measured has a water or Air
Hammer, a buffer valve must be installed at the front of the
pressure transmitter interface.
4.When used to measure the pressure of the outlet of a pressure
pump, a buffer valve or a buffer bend must be added at the front
end of the pressure transmitter.
5.When a pressure transmitter is installed in the pipeline, the
first step is to clean up the liquid at the threaded port and
install the pressure transmitter. The second step is to slowly open
the valve after installation to prevent pressure impact.
6.When a pressure transmitter is mounted on a turn pipe, it should
be at least 9 times the diameter of the pipe at the turn and
preferably downstream of the turn flow.
7.When a motor is present in the measuring system, ensure that the
motor housing and the housing of the power supply for the pressure
transmitter are at the same potential and that the resistance
between the housing and the Earth does not exceed 9;
8.When there is a transducer in the measuring system, the shell of
the motor controlled by the transducer should be connected to the
ground wire of the power supply of the pressure transmitter.
9.When the pressure hole of the pressure transmitter is blocked, it
is forbidden to use the sharp device to dredge the pressure hole.
10.The pressure transmitter should be dismounted and the part of
the pressure hole should be immersed into the liquid that can
dissolve the blocked material. If the user needs to calibrate zero
or calibration full range should be under the guidance of our
technical people, do not open the transmitter to adjust;
11.The pressure transmitter should be installed in a position that
is not vulnerable to collision and trampling;
12.Transmission Cables for pressure transmitters shall not be
placed in the same threading tube or in the same wiring groove as
other high-voltage or high-voltage cables;
13.When installing pressure transmitters in the Dorey area, be sure
to install lightning protection devices and ensure that the
pressure transmitters and power supply are reliably connected to
the ear;
FAQ
Q:Can you accept ODM & OEM service ?
A:We professional provide OEM &ODM service for all of items.
Q:Could I get samples?
A:Yes,we have materials in stock to help you to get the samples as
soon as we can.
Q:How about the quality of the magnets?
A:We have the certification of ISO,CE and ROSH,we could send the
certification test of our company to you.
Q:How is the price?
A:As we believe the quality is the most important,we will provide
the best quality ultrasonic level sensor we can with reasonable
price.
Q:Could you provide me the shortest lead time?
A:We have materials in our stock,if you really need,you can tell us
and we will try our best to satisfy you.
Q: How can I get my sensors?/ What's the means of transport?
A. We main delivery goods by express: DHL, FedEx, UPS,TNT, etc or
logistics by indicator
Q. How to order ?
A. In order to recommend you the most suitable radar level sensors
and make an accurate quotation, please provide the following
information and send it to our sales when you are going to make an
inquiry, thanks !
1. What is your medium? Water, oil or others?
2. Level range: 0-10meters, or others?
3. Output signal: 4-20mA, RS485 or others?
