Product overview

SEV5000 Ball ValveIt is suitable for on-off control in heating system and fan coil system of air conditioning. It consists of ball valve and actuator. The actuator drives the ball to rotate 90 degrees. The actuator is driven by synchronous motor with built-in limit contacts, which can make the valve turn off when it is fully open or closed, and the action is stable. SEV5000 SeriesBall ValveIt is widely used in heat, air conditioning system, ground heating system, solar exhaust system and other systems.

- Product characteristics

Synchronous motor, two angle travel limit switch, keep valve status after power off
Low noise, running noise less than 40dB
Plastic rotating shaft, non-conductive, non-heat transfer
Long service life

Technical parameters

Power supply voltage: AC220V 50/60HZ or AC24V 50/60HZ
Operating power: 6W or 9W (only when valve is open or closed)
Switching time: 15 seconds
Protection Level: IP54
Operation mode: angle stroke 90 degree switch, positive and negative rotation
Torque: 4Nm~7Nm
Working environment: 2 ~60.
Applicable media: hot and cold water, ethylene glycol aqueous solution within 60%.
Medium temperature: 2 ~95.
Lead length: 50cm
Drive size: 62x70x83mm
Valve body specifications: DN15/DN20/DN25/DN32 (two-way) DN20/DN25 (three-way)