80--3000 # Brush Research Flex Hone For Bores Cleaning And
Finishing
Descriptions
Brush Research Flex Hone both for hydraulic & IC ENGINE BORES AND
LINERS. These are also extensively used in Plateau honing
of small bores. The special construction afford a mild but constant
pressure against the wall of the cylinder giving a fairly uniform
material removal & surface finish in the bore. grits and sizes can
be selected based on individual application and techincal
parameters.
Specification
| Description | Brush Research Flex Hone |
| Specification | 4---500mm |
| Grit size | 80--3000 # |
| Material | boron carbide, black silicon carbide, green silicon carbide, brown
corundum, white corundum |
| Speed | 600-1400 RPM |
Application:
Our honing brush can remove internal burrs and passivate the angle
of internal grooves. Burrs will be generated at the grooves and
intersecting lines of the internal holes in the general mehanical
addiation.
These burrs will scratch the rotary axis that is compatible with
the holes, reduce the accuracy. and cause
leakage in the valve body, thus affecting the product quality.
Benefits
The effect of polishing, after honing, makes the hole have higher
accuracy, has achieved more accurate matching .
Specification for honing abrasive brush: 4---500mm
The commonly used grain of honing brush: 80--3000 #
Abrasive honing brush material: boron carbide, black silicon
carbide, green silicon carbide, brown corundum, white corundum
Recommended speed of honing abrasive brush: 600-1400 RPM
If u are interested in our production or would like to ask more
about it, pls just add my whats app/ we chat: 0086-13783415132.
