Fast Thermal Response Low Profile Thin Film NTC Thermistor 10K 3950
For Printer
Overview Of The Low Profile Thin Film NTC Thermistor 10K 3950
1) R25(Ω): 5K～500K
2) [Product Features] High sensitivity, fast heat induction, good
stability, and high reliability
3) [Product use] Computers, printers, household appliances
4) Film type thermistors can reach up to 200°C, and are mainly used
for temperature measurement, detection and control: such as air
conditioners, microwave ovens, electric fans, electric heaters,
rice cookers, induction cookers, hair dryers, etc.
5) Temperature detection and compensation of automatic office
equipment, such as copiers and printers.
Introduction Of The Low Profile Thin Film NTC Thermistor 10K 3950
MF55 series film temperature measurement NTC thermistor is a new
product that our company have recently researched, and it is made
by whole-newly technique,and it has the viture of novel
configuration and good security and good coherence. It can be used
in such applications as temperature measurement and control and
compensation.
ApplicationsOf The Low Profile Thin Film NTC Thermistor 10K 3950
◎ Compurter
◎ Printer
◎ Household Appliance
Features Of The Low Profile Thin Film NTC Thermistor 10K 3950
1. Suitable for narrow spaces
2. Fast response time
3. Flexibility and easy welding
4. Thin film coating, excellent insulation and heat resistance
5. Sensitive to the environment
6. Length options: 25mm, 50mm
7. High stability
8. Comply with RoHS directive
Dimension Of The Low Profile Thin Film NTC Thermistor 10K 3950 (mm)
Main Techno-Parameter Of The Low Profile Thin Film NTC Thermistor
10K 3950
◎Rated zero power resistance(R25)∶5k Ω~500k Ω
◎Allowance tolerance of R25:±1%,±2%,±3%,±5%E
◎Range of B value(B25/50):3270-4750k
◎Allowance tolerance of (Label by Requirment) B-value±1%,±2%
◎Dissipation coefficient: 20.8mW/C(In Still Air)
◎Operating temperature :-40 ~ +125deg
◎Rated power:≤50mW
Specification Of The Low Profile Thin Film NTC Thermistor 10K 3950
MF55 103 F 3380 F
① ② ③ ④ ⑤
①MF55 fim temperature neasurement NTC thermistor
② Resistance:103.…10KΩ
③F:±1% G:2% H:3%J:5%
④B-valuc;3380K:3950K
⑤ Tolerunce of B value F:±1% G:±2%
| P/N | Resistance | Beta value | Operating temperature |
| R25 (KΩ) | Tol. | (25/50℃) | (25/85℃) | Tol. | (℃) |
| (K) |
| MF55□502□3270A | 5 | ±1％
±2％
±3％
±5％ | 3270 | | ±1％
±2％ | -50～260 |
MF55□502□3470A | 5 | 3470 | |
| MF55□103□3380A | 10 | 3380 | |
| MF55□103□3435B | 10 | | 3435 |
| MF55□103□3470B | 10 | | 3470 |
| MF55□103□3950A | 10 | 3950 | |
| MF55□103□3975B | 10 | | 3975 |
| MF55□203□3950A | 20 | 3950 | |
| MF55□303□3950A | 30 | 3950 | |
| MF55□473□3950A | 47 | 3950 | |
| MF55□503□3950A | 50 | 3950 | |
| MF55□104□3950A | 100 | 3950 | |
Precautions Of The Low Profile Thin Film NTC Thermistor 10K 3950
1). Do not bend the resistance wire frame at will to avoid the chip
and the wire frame from falling off and cause poor resistance;
2). The temperature during soldering should not exceed 300℃, and
the soldering time should not exceed 0.5 seconds;
3). Use a hot air gun for heat shrinkable tubing, and the
temperature of the air gun should be controlled at about 120°C;
4). Use a constant temperature soldering iron when soldering, the
tip of the soldering iron is flat, the resistor is held in one
hand, and the wire in the other hand is used for butt welding,
which can improve production efficiency and shorten the welding
time;
5). Special reminder: Do not touch the chip (that is, the top of
the resistor) with your hands !
