1. About us.
Light Country was founded in 1985 in Taiwan.
We dedicate on KSD301 snap action thermostat and rocker switch.
These parts are widely used in household appliance, electrical
products, industrial facilities, medical devices, etc.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificates, comply with ROHS/REACH regulations.
We promise high quality products, timely delivery, attentive
service, effective improvements.
2. Why choose KSD301 Snap Action Thermostat?
1) High sensitivity, rapid heat transmission, for excellent thermal
protection and temperature control.
2) All snap action thermostats will be tested before shipping, high
pass rate.
3) Easy mounting.
4) Many choices for components used on snap action thermostat,
flexible support for customized production.
3. Parameters and Specification.
| Factory | Light Country(Changshu)Co.,Ltd |
| Product | KSD301 Snap Action Thermostat |
| Type | Automatic Reset |
| Electrical Rating | 10A 250V, 16A 250V, 15A 125V |
| Operating Temperature | 0℃~180℃ |
| Differential | 8℃ or more(depend on customer's demand) |
| Endurance | 100,000 cycles |
| Bracket | Fixed bracket |
| Case material | PPS |
| Terminal | 90° |
| Terminal | Copper with tin plated |
| Circuit Resistance | 50mΩ or less |
| Insulation Resistance | 100MΩ or more(DC 500V) |
| Dielectric Strength | AC 1,450V for 1 minute |
| Application | Household such as clothes dryer |
When using snap action thermostat, recommend to choose following
wires considering rated current:
| Rated current | ≤3A | ≤5A | ≤7A | ≤12A |
| Traverse area | 0.3 mm² | 0.5 mm² | 0.75 mm² | 1.25 mm² |
| UL wire gauge | AWG22 | AWG20 | AWG18 | AWG16 |
| Rated current | ≤15A | ≤20A | ≤30A | -- |
| Traverse area | 2.0 | 3.5 | 5.5 | -- |
| UL wire gauge | AWG14 | AWG12 | AWG10 | -- |
4. If the picture product could not meet your demand, please refer to
below KSD301 Thermostat Specifcation for more choices, kindly share the required details such as action/reset temperature,
bracket, terminal types... with us. We will support customized
production for you.
5. Attentions about KSD301 Snap Action thermostat installation.
1) During thermostat installation, need high attention that the
temperature-sensitive surface should not be deformed, and the top
of the cap should not be collapsed or deformed, so as not to affect
the temperature performance and electrical performance of the
product.
2) Snap action thermostat shall be installed with cap connected
with the grounding metal parts or the power grounding wire of the
equipment to reduce the electromagnetic radiation and interference
signals of the complete machine.
3) During installation, need to make sure the thermostat’s
temperature-sensing surface to be evenly contacted with the
temperature-controlling part, and the force should be evenly
applied to stabilize the temperature-sensing. Besides, need to coat
the surface of temperature-sensitive with thermal grease or other
similar heat-conducting medium.
Thanks for your time, please feel free to contact us via below
ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
