Taiwan Brand Manual Reset Bimetal Thermostat For Hot-Melt Machine
UL VDE
Manual reset thermostat is one of a temperature controller. As the
working ambient temperature changes to the set temperature,
physical deformation and some other special effects happen inside
the switch automatically, to turn off the circuit, to protect the
whole machine unit and operators. It need to be reset manually.
1. Why choose Manual Reset Bimetal Thermostat?
1) High sensitivity, rapid heat transmission, for excellent
temperature control.
2) Easy mounting.
3) Many choices for thermosat components, always support customized
production.
4) All finish goods will be tested before shipping, high pass rate.
2. Parameters and Specification.
| Factory | Light Country(Changshu)Co.,Ltd |
| Product | Bimetal Thermostat |
| Action Type | Manual Reset |
| Electrical Rating | 10A 250V, 16A 250V, 15A 125V. |
| Operating Temperature | 0℃~180℃ |
| Differential | 10~30K(15K is the standard) |
| Endurance | 100,000 cycles |
| Bracket | Fixed bracket |
| Case | PPS |
| Terminal Orientation | 0° |
| Terminal Material | Copper with tin plated |
| Circuit Resistance | 50mΩ or less |
| Insulation Resistance | 100MΩ or more(DC 500V) |
| Dielectric Strength | AC 1,450V for one minute |
| Application | Hot melt machine |
When using manual reset bimetal thermostat, recommend to choose
following wires considering rated current:
| Rated current | ≤3A | ≤5A | ≤7A | ≤12A |
| Traverse area | 0.3 mm² | 0.5 mm² | 0.75 mm² | 1.25 mm² |
| UL wire gauge | AWG22 | AWG20 | AWG18 | AWG16 |
| Rated current | ≤15A | ≤20A | ≤30A | -- |
| Traverse area | 2.0 | 3.5 | 5.5 | -- |
| UL wire gauge | AWG14 | AWG12 | AWG10 | -- |
3. Attentions about Manual Reset Bimetal Thermostat installation.
1) During installation, need high attention that the
temperature-sensitive surface should not be deformed, and the top
of the cap should not be collapsed or deformed, so as not to affect
the temperature performance and electrical performance of the
product.
2) Manual Resest thermostat shall be installed with cap connected
with the grounding metal parts or the power grounding wire of the
equipment to reduce the electromagnetic radiation and interference
signals of the complete machine.
3) During Manual Reset thermostat using process, need to avoid
moisture and pollution, otherwise it will affect the electrical
performance of the product. Recommended thermostat working
environment is that relative humidity ≤90%, no contact with
corrosive and flammable things.
4) Manual reset series thermostats can only be reset after the
temperature drops at least 20℃; And when reset, the force should be
moderate, to just can make the thermostat reset as appropriate
(about 5~6N), otherwise there is an impact on the temperature.
4. If the picture product could not meed your demand, please refer to
below KSD301 Thermostat Specification for some common components for best price support. Kindly share your specification details such as action/reset
temperature, bracket, terminal types... with us. We will support
customized production.
5. About us.
Light Country was founded in 1985 in Taiwan.
We dedicate on bimetal thermostat and rocker switch.
These parts are widely used in household appliance, motor vehicles,
industrial facilities, medical devices, etc.
To provide customer best service, we’re with integration of
R&D, production, sales and post-sales as well.
Our factory already got ISO9001, ISO14001, IATF16949 certificates.
Our products already got CQC, UL/CUL, VDE, TUV, SEMKO, NEMKO
certificates, comply with ROHS/REACH regulations.
We promise high quality products, timely delivery, attentive
service, effective improvements.
We deserve your trust.
Thanks for your time, please feel free to contact us via below
ways,
Sales: Thomas Lee/Julie Liu
Tel: +86 138 6234 1050/+86 180 2126 2273
Mail: lixin@liangqundianzi.cn or ksd301@aliyun.com.cn
WhatsApp: +86 15850802713
