10 Liter Per Hour Water Plant RO System for Laboratory Hospital

The RO productivity of laboratory reverse osmosis pretreatment water systems is 10-60 l/h for our standard benchtop systems and 1-2 gal/min for high capacity frame mounted systems. RO systems could remove 95-99% of contaminants in tap water.

The water source is tap water and the system contains built-in pre-filters. A variety of tank options are available, including pressurized tanks that protect against air pollution risks and eliminate the need for additional feed pumps.

The RO water system could be used in Laboratory and hospital, too; The Ro water system include UP and RO outlet, except to supply the ultra purification water, also could support the drinking water;

1. Constant pressure supply of pure water and ultrapure water;
2. Automatic protection flushing is carried out at startup, and the water tank is automatically put into standby after filling with water;
3. Split water supply, one machine for dual use (pure water and ultrapure water can be taken at the same time);
4. Two-way water quality online monitoring, real-time monitoring of pure water and ultrapure water quality;
5. Original imported 0.22um terminal sterilization filter to ensure water quality sterility;
6. Original imported nuclear grade resin, good effluent quality, long service life;
7. One-piece molded plastic shell, ergonomic design, hydroelectric separation structure;
8. The equipment is equipped with a water leakage detection and early warning device.