1.0mm boardthickness single layer PCB with four nuts for Industril
equipments
Single layer PCB, also known as single-sided PCB, which is a type
of PCB which comes with only one layer of conducting material on
one side of the board and other side is used for incorporating
different electronic components on the board. Single layer PCB is
widely used in the printed circuit board design in a variety of
different electronic sectors where low costs are required. What’s
more, single layer PCB has been made of various of material, such
as paper reinforced phenolic resin with copper foil and glass fiber
reinforced epoxy resin with copper foil and so on.
In the environment of multi-variety and small-batch production,
large changes in output and frequent dynamic adjustments of
production varieties make the production process complex and
changeable, and production efficiency plummets. Based on the SMT
production of multi-variety, small-batch and high-mixed packaging,
we summarized some key points and experiences of multi-variety and
small-batch production, and looked for some solutions and methods
to adapt to this production mode, so that multi-variety and
small-batch SMT production The efficiency has been greatly
improved.
| 0.25mm |
| 0.003" |
| Green or as your request |
| FR-4 |
| 2 Layers |
| 5pcs |
| 1.6mm |
| HASL Lead Free |
| Yes |
| vaccum package |
Construction of Single Layer PCB
The base material, which is also known as substrate, is made up of
insulating fiber glass that has compact look and PCB strength.
What’s more, the type and nature of base material depends on
whether the board is flexible PCB or rigid PCB. There is a copper
layer which has conducting path for various components on the board
above substrate. Needless to say, different boards have different
copper thickness according to your needs and demands, defining in
ounces per square foot.
One one hand, there is a solder mask layer on the top of copper
foil. The layer is mainly in protecting the copper foil from
insulating which avoids the conduction in case direct contact
happens with some conducting material. One the other hand, there is
a silkscreen layer on the top of all layers, which is mainly in
adding characters and symbols on the board, so it’s easy to have a
better understanding of the board.
