PE Silent Drainage Pipe Fittings Hot Melt Flexible Socket
Connection HDPE 45° Oblique Tee
----------------------------------------
Basic Info.
HDPE is a highly crystalline, non-polar thermoplastic resin. The
appearance of the original HDPE is milky white, and the thin
section is translucent to a certain extent. PE has excellent
resistance to most domestic and industrial chemicals. Certain types
of chemicals can cause chemical corrosion, such as corrosive
oxidizers (concentrated nitric acid), aromatic hydrocarbons
(xylene) and halogenated hydrocarbons (carbon tetrachloride). The
polymer is non-hygroscopic and has good water vapor resistance, and
can be used for packaging purposes. HDPE has good electrical
properties, especially the high dielectric strength of the
insulation, making it very suitable for wires and cables. Medium to
high molecular weight grades have excellent impact resistance, even
at room temperature and even at low temperatures of -40F
Outer Diameter
DN (mm) | SDR 9
PN20 | SDR 11
PN16 | SDR 13.6
PN12.5 | SDR 17
PN10 | SDR21
PN8 | SDR26
PN6 |
| Wall Thick Ness(mm) |
| 20 | 2.3 | 2.3 | | | | |
| 25 | 3 | 2.3 | 2.3 | | | |
| 32 | 3.6 | 3 | 2.4 | | | |
| 40 | 4.5 | 3.7 | 3 | 2.4 | | |
| 50 | 5.6 | 4.6 | 3.7 | 3 | | |
| 63 | 7.1 | 5.8 | 4.7 | 3.8 | | |
| 75 | 8.4 | 6.8 | 5.6 | 4.5 | | |
| 90 | 10.1 | 8.2 | 6.7 | 5.4 | 4.3 | |
| 110 | 12.3 | 10 | 8.1 | 6.6 | 5.3 | 4.2 |
| 125 | 14 | 11.4 | 9.2 | 7.4 | 6 | 4.8 |
| 140 | 15.7 | 12.7 | 10.3 | 8.3 | 6.7 | 5.4 |
| 160 | 17.9 | 14.6 | 11.8 | 9.5 | 7.7 | 6.2 |
| 180 | 20.1 | 16.4 | 13.3 | 10.7 | 8.6 | 6.9 |
| 200 | 22.4 | 18.2 | 14.7 | 11.9 | 9.6 | 7.7 |
| 225 | 25.2 | 20.5 | 16.6 | 13.4 | 10.8 | 8.6 |
| 250 | 27.9 | 22.7 | 18.4 | 14.8 | 11.9 | 9.6 |
| 280 | 31.3 | 25.4 | 20.6 | 16.6 | 13.4 | 10.7 |
| 315 | 35.2 | 28.6 | 23.2 | 18.7 | 15 | 12.1 |
| 355 | 39.7 | 32.2 | 26.1 | 21.1 | 16.9 | 13.6 |
| 400 | 44.7 | 36.3 | 29.4 | 23.7 | 19.1 | 15.3 |
| 450 | 50.3 | 40.9 | 33.1 | 26.7 | 21.5 | 17.2 |
| 500 | 55.8 | 45.4 | 36.8 | 29.7 | 23.9 | 19.1 |
| 560 | 62.5 | 50.8 | 41.2 | 33.2 | 26.7 | 21.4 |
| 630 | 70.3 | 57.2 | 46.3 | 37.4 | 30 | 24.1 |
| 710 | | 64.5 | 52.2 | 42.1 | 33.9 | 27.2 |
| 800 | | 72.7 | 58.8 | 47.4 | 38.1 | 30.6 |
| 900 | | 81.8 | 66.2 | 53.3 | 42.9 | 34.4 |
| 1000 | | 90.2 | 72.5 | 59.3 | 47.7 | 38.2 |
| 1200 | | | 88.2 | 67.9 | 57.2 | 45.9 |
| 1400 | | | 102.9 | 82.4 | 66.7 | 53.5 |
| 1500 | | | 110.2 | 88.2 | 71.4 | 57.6 |
| 1600 | | | 117.6 | 94.1 | 76.2 | 61.2 |
Advantage
High-density polyethylene is non-toxic, tasteless, and odorless
white particles with a melting point of about 130°C and a relative
density of 0.941 to 0.960. It has good heat resistance and cold
resistance, good chemical stability, high rigidity and toughness,
and good mechanical strength. Dielectric properties and
environmental stress cracking resistance are also good.
Details
Application
1. It is recommended to take sheltering measures for outdoor laying
in the open air and places exposed to sunlight.
2. Buried HDPE water supply pipelines, pipelines with DN≤110 can be
installed in a serpentine shape in summer, pipelines with DN≥110
have sufficient soil resistance and can resist thermal stress, so
there is no need to reserve a pipe length; in winter, there is no
need Reserve the tube length.
3. When installing HDPE pipes, if the operating space is too small
(such as pipe wells, ceiling construction, etc.), electrofusion
connection methods should be used.
4. When connecting hot-melt sockets, the heating temperature should
not be too high or too long, and the temperature should be
controlled at 210±10℃, otherwise it will cause too much squeeze out
of the fittings and reduce the inner diameter of the water; the
pipe fittings are inserted. Or the pipe interface should be clean,
otherwise it will cause the socket to escape and leak; at the same
time, pay attention to control the angle and direction of the pipe
to avoid rework.
5. When connecting with hot melt butt, the required voltage should
be between 200～220V.
Certificate
Company Profile
High Mountain Pipe has passed ISO 9001, ISO 14001, OHSAS 18001 management system
certification and China environmental labeling product
certification. The company is applying for CQC (China Quality)
certification and CNAS (China National Accreditation Service for
Conformity Assessment) national laboratory qualification
accreditation. The company adheres to the business philosophy of
"integrity, modesty, and a long history"
Long-term stock products: FRPP pipes, HDPE pipes, PP pipes, PPH
pipes, PP boards, PE boards, UHMWPE boards and all pipe fittings.Pipes and plates with special quality requirements and colors,
large quantities can be customized according to customer
requirements and colors.
FAQ
Q: Why choose us?
A: We are a professional manufacturer with competitive price,
excellent quality and fast delivery time.
Q: Can you make special designs and logos on your products?
A: Yes, it is very easy.
Q: Can I customize the size I need?
A: Yes
