Coupling Driving Industrial Anti-Explosion Induced Draft Fan
Introduction Of Centrifugal Fan
6-06 series centrifugal fan is generally used for gas
transportation of granular or powdery materials, and can be widely
used to transport air and non-corrosive non-self-igniting,
non-viscous substances.
The temperature of the medium generally does not exceed 50°C (max
80°C), the dust and hard particles contained in the medium is not
more than 150 mg / m3.
It is suitable for discharging gas containing dust, wood chips and
finely divided fibers (If it contains hard particles, a dust
removal device must be installed in front of the fan.), it can also
be used as a general ventilator for ventilation.
Technical data
| series | model | Rotation Speed
(r/min) | Total Pressure
(Pa) | Air Capacity
(m³/h) | Power
(kW) |
|---|
| 6-06 | 8D | 1450 | 1859～2745 | 11000～26400 | 15 ~ 22 |
| 9D | 1450 | 2353～3474 | 15700～37500 | 30 ~ 45 |
| 10D | 1450 | 2905～4289 | 21500～51500 | 45 ~ 75 |
| 11D | 960 ~ 1450 | 1541～5190 | 22700～68500 | 22 ~ 110 |
| 12D | 960 ~ 1450 | 1834～6176 | 24600～89000 | 37 ~ 160 |
| 13D | 960 ~ 1450 | 2152～7248 | 31200～113000 | 55 ~ 250 |
| 14D | 960 ~ 1450 | 2496～8406 | 39000～141000 | 75 ~ 400 |
| 15D | 730 ~ 1450 | 1657～9650 | 36600～172000 | 45 ~ 500 |
| 16D | 730 ~ 1450 | 1885～10980 | 44300～211000 | 75 ~ 710 |
| 17D | 730 ~ 960 | 2128～5433 | 53200～168000 | 90 ~ 280 |
| 18D | 730 ~ 960 | 2386～6091 | 63100～199000 | 110 ~ 355 |
| 19D | 730 ~ 960 | 2658～6787 | 74200～234000 | 160 ~ 500 |
| 20D | 730 ~ 960 | 2946～7520 | 86700～273000 | 200 ~ 630 |
| 21D | 580 ~ 960 | 2050～8290 | 79500～316000 | 200 ~ 800 |
| 22D | 580 ~ 960 | 2250～9099 | 92200～363000 | 220 ~ 1000 |
| 23.5D | 580 ~ 960 | 2567～10380 | 112000～443000 | 220 ~ 1400 |
| 25D | 580 ~ 730 | 6794～6464 | 134000～406000 | 355 ~ 800 |
| 26.5D | 480 ~ 730 | 2236～7633 | 132000～483000 | 220 ~ 1120 |
| 28D | 480 ~ 730 | 2496～8522 | 156000～569000 | 315 ~ 1400 |
| 29.5D | 480 ~ 730 | 2771 ~ 9460 | 183000～667000 | 400 ~ 2000 |
Application
1. Install centrifugal fans in mines and tunnels to re-enter fresh
air and exhaust dirty air to ensure air circulation in the mines
and tunnels.Centrifugal fans can help dust discharge, ensure air
transparency in mines and tunnels, and ensure the health of workers
in mines and tunnels.
2. A centrifugal fan is installed in the cooling tower, which not
only plays the role of ventilation and ensures the normal operation
of the cooling tower, but also plays a positive role in improving
the cooling effect of the cooling tower by the large flow wind
generated by the centrifugal fan.
3. Main ventilator in coal mine is an important equipment to ensure
normal ventilation in underground mine, which not only affects the
production capacity of coal mine, but also is very important to the
safety of mining industry.
Product Advantages
1.It can output higher outlet pressure and provide more gas flow at
the same time, low noise.
2. The fan speed can be flexibly set by matching different belt
pulley diameters to make the fan run at the highest efficiency
point and reduce energy waste.
3. Motor slide guide can be provided for convenient belt tensioning
to reduce energy loss caused by belt slack.
4. The bearing housing is reserved for the installation position of
temperature and vibration sensors, which can facilitate the
installation of fan operation monitoring device.
5. Use liquid lubricating oil. It is not necessary to open the
bearing housing to replace and fill the lubricating oil. The
bearing housing is provided with an observation window for easy
observation of the quality and stock of the lubricating oil.
6. The bearing housing uses labyrinth mechanical seal, unique
anti-leakage design inside, vent hole at the top, and sealing
grease at the joint, completely eliminating the possibility of oil
leakage in the bearing hosing.
FAQ
1. What parameters need to be provided when you design the Heat
Dissipation Power Plant Blower Fan?
Answers: Air flow, total pressure or static pressure, inlet
temperature, local voltage and frequency, Altitude etc.
If there is flammable and explosive gas, or big dust loading in the
medium, please also inform the designer.
2. How about your company’s pre-sales service and after-sales
service?
Answers: Before our cooperation, we have the professional technical
team to help you make the technical solution according to your
working condition, to make sure the centrifugal fan efficiency
operation.
After sales service, we will offer 12 months’ repairing service,
and provide lifelong follow-up services. Besides, our engineers are
available for going abroad to offer the repairing service.
3. Does your company have qualifications?
Answers: SIMO Blower has obtained ISO 9001-2008, CE, TUV
certifications and so on.
