180mm Chisel For Hydraulic Breaker Chisel For Hydraulic Hammer
(1) Main technical parameters on 180mm chisel for hydraulic hammer
Model: HYQG180
Breaker chisels diameter: 180mm
Hydraulic hammer tools length: 1700mm or customized length
Breaker chisel weight: 280kgs
Applicable carrier weight: 40t
Applicable excavator brand: SANY, XCMG, LIUGONG, SHANTUI, CAT,
HYUNDAI, DOOSAN DAEWOO,
VOLVO, KOMATSU, KOBLECO, KUBOTA, HITACHI, XGMA, FOTON, STRONG
ZOOMLION
(2) Details of Applicable Hydraulic Hammer HY180
Model: HY180
Keywords: hydraulic breaker hammer/hydraulic rock hammer
Driving oil pressure:280-300KG/CM2
Drivign oil flow:220-270L/MIN
Striking frequency:180-220BPM
High pressure soft hose diameter: 1.2 inch
Overall size: 2240*750*1620mm
Weight: about 4950kgs
(3) How to manufacture one hydraulic breaker chisel?
To fabricate one good quality excavator hydraulic breaker chisel,
below steps are needed:
1. Good quality raw materials---round steel purchasing;
2. Saw and cut the round steel to different length according to
different demands;
3. Process the cutted round steel, to make the outline as a drill
rod;
4. Process the flat pin groove with milling machine;
5. Polish the drill rod;
6. Heat treatment on the breaker chisels drill rods;
7. Do shotblasting treatment on the appearance, making it smooth;
8. Nitrate tempering treatment；
9. Painting on the drill rod
(4) How to pack and ship the chisel for hydraulic hammer?
Packing: firstly packed with thick paper, then packed with exported
plywood pallets;
Shipping: load the packed chisels into container, then shipped by
sea or by road
