X5042 Vertical Knee type Milling Machine
Product Presentation
X5042 vertical milling machine, suitable for bar, wafer, Angle,
forming and end milling cutter, plane, slope, Angle, groove and
edge processing. After installing the dividing head accessories on
this machine tool, it can also milling the workpiece such as gear,
reamer, spiral groove, CAM and drum wheel, etc., which is widely
used in machining industries. The parts of the machine tools that
are easy to wear are equipped with clearance adjustment devices to
ensure the accuracy and working stability of the machine tools. The
machine has a good safety device, manual feed and motor feed
interlocking mechanism. Each stroke is equipped with a limit device
to ensure the safety of operators and machine tools.
Main features:
1. Worktable can rotate ±45°,which can also auto feed & rapid feed
in 3 directions.
2. Vertical milling head is an individual parts that spindle sleeve
can move vertically by handle wheel on right side.
3. Spindle speed is controlled by single handlebar with 20 steps.
4. Feeding gearbox is installed on left of worktable base, with
feeding motor on back to get 15 steps speed.
5. Feeding speed operation box is hanged on right side of
worktable, which is symmetrical to feeding gearbox, it makes
different movement of worktable.
6. Main guideways of machine are rectangular type with wear
resistant measures to keep high accuracy.
7. With high spindle power & wide speed range, machine can do high
speed milling with hard alloy tools.
8. The machine can do heavy duty machining with good rigidity.
9. Installed with complete cooling & lubrication system.
Product Configuration
| Main specifictions | Unit | X5030C | X5036 | X5042 |
| Worktable Size | mm | 300×1250 | 360×1600 | 420×1800 |
| T slots (N×W×D) | mm | 3×14×63 | 3×18×80 | 3×18×90 |
| Max. load bearing of worktable | Kg | 250 | 500 | 800 |
| Longitudinal travel (Manual/Power) X | mm | 800 | 1020/1000 | 1200/1180 |
| Cross travel (Manual/Power) Y | mm | 265 | 300/280 | 360/350 |
| vertical travel (Manual/Power) Z | mm | 410 | 410/400 | 470/450 |
| Max.rotary angle of vertical milling head | | ±45° | ±45° | ±45° |
| Arbor diameter | mm | Ф22,Ф27 | Ф32 Ф40 | Ф32 Ф40 |
| Distance from spindle center to vertical guide way | mm | 290 | 380 | 450 |
| Distance from worktable center to vertical guide way | mm | 152 ～ 417 | 235 ～ 535 | 275 ～ 655 |
| Distance from spindle nose to worktable surface | mm | 60 ～ 470 | 60 ～ 460 | 40 ～ 510 |
| Spindle hole taper | | 7:24 No.40 | 7:24 No.50 | 7:24 No.50 |
| Spindle quill travel | mm | 70 | 75 | 85 |
| Spindle speed steps | steps | 12 | 18 | 18 |
| Spindle speed range | r/min | 35 ～ 1600 | 30 ～ 1500 | 30 ～ 1500 |
| Feed speed steps | steps | 12 | 18 | 18 |
Feed speed range (X/Y/Z) | mm/ min | 15 ～ 800 15 ～ 800 6 ～ 270 | 15 ～ 750 15 ～ 750 5.7 ～ 280 | 22 ～ 1100 22 ～ 1100 8.3 ～ 410 |
| Rapid feed speed range (X/Y/Z) | mm/ min | 2100/2100/880 | 2250/2250/844 | 2400/2400/900 |
| Main motor power | Kw | 4 | 7.5 | 11 |
| Feed motor power | Kw | 0.75 | 1.5 | 3 |
| Machine dimension | mm | 1750/1500/1800 | 2307/2067/2096 | 2522/2265/2432 |
| Package dimension | mm | 1660/1570/2180 | 2200/1770/2270 | 2450/2280/2460 |
| Machine weight | Kg | 1800 | 3370 | 4450 |
| Voltage/ Frequency | V/Hz | 380/50 | 380/50 | 380/50 |
