MDH80S Automatic Machining Centers High Speed double pallets
Horizontal Machining Center
Product Presentation
MDH series horizontal machining center is a high-efficiency and
precision horizontal machining center developed and produced by our
company. It is widely used in parts, body parts, shell parts,
special-shaped parts processing, and parts can be clamped
Automatically complete the multi-step process of four-sided
milling, boring, drilling, expanding, reaming, and tapping.
| Standard configurations | Optional configurations |
| • Two-speed internal transmission spindle | •BRT CNC turntable |
| • Screw hollow cooling system | • Spray cooling |
| •Automatic tool change system | •High pressure cooling unit |
| • Screw chip conveyor (both sides) | • Spindle cooling device |
| •Automatic lubrication system (spindle) | •Electrical cabinet thermostatic control device |
| • Rigid tapping | • Lifting chip conveyor |
| •Electrical cabinet heat exchanger | •Grating ruler |
| • Spindle cooling device | •M30 automatic power-off device |
| •Closed protective cover | |
| • RS-232 data transmission system | |
Main Technical Parameters
| Product Model | Unit | MDH65 | MDH65A | MDH80S |
| Worktable size (L*W) | mm | 630X630 | 630X630 | 800X800 |
| No.of Pallet | | 2 | Single table | 2 |
| Table type | | IT Opt:BRT |
| Table indexing | | IT (1° X360°)
BRT (0.001° X360°) |
| Table indexing time | S | 1.7(90°) |
| Pallet changing time | S | 12 | — | 12 |
| Max. table load | Kg | 1300 |
| X/Y/Z-axis travel | mm | 1050/900/900 | 1050/900/800 |
| X/Y/Z Axis guide way type | | Linear roller guideway |
| Distance from table surface to spindle center | mm | 80-980 |
| Distance from spindle nose to table | mm | 200-1100 | 300-1100 |
| Rapid traverse of X/Y/Z axis | m/min | 54 |
| Cutting feed rate | | 1-20000 |
| Spindle taper | | No.50 (7:24) |
| Max spindle speed | rpm | 8000(Motor Spindle)
Opt:12000(Motor Spindle)
Opt:6000(Gear box) |
Spindle motor power
(Continueous/30 min) | kw | 8000rpm:18.5/22
12000rpm:25/30
6000rpm:22/26 |
| Tool magazine capacity | T | 40(Opt:60/80/120) |
| Tool shank type | | BT50 |
| Max. tool length | mm | 500 |
| Max. tool weight | Kg | 25 |
| Max. tool diameter (w/oadjacenttools) | mm | Ø115(Ø270) |
| Tool changing time(T-T) | | 2 |
| X/Y/Z axis positioning accuracy | | 0.01 |
| X/Y/Z axis repeatability accuracy | | 0.006 |
| CNC controller | | FANUC 3li |
| Machine dimensions(LXWXH) | mm | 5145X3342X3355 | 5100X3342X3350 | 5145X3342X3350 |
| Machine weight | Kg | 18000 | 16500 | 18000 |
Product Features
(1) High precision -- the X, Y and Z coordinate screw of the
machine tool all adopts advanced hollow cooling technology, which
effectively controls the heat deformation in the process of machine
tool processing and improves the machining accuracy of the machine
tool. In addition, the machine tool has the function of temperature
compensation. The temperature sensor is installed in the main
position of the machine body, and the precision of the machine tool
is realized by analyzing and compensating the coordinate position
of the CNC system.
(2) High speed -- the machine spindle adopts motorized spindle
structure, with a maximum speed of 12000rpm and internal two speed
changes, which can meet the requirements of low speed cutting and
high speed machining; X, Y, Z three coordinate guide uses high
rigid linear rolling guide, its fast moving speed up to 60m/min;
The machine adopts linkage tool changing mechanism (tool changing
time: 2 seconds). The above parameters are in the domestic leading
level and international advanced level.
(3) high rigidity - the main part of the machine tool is all made
of resin sand casting, the bed body is an integral casting, and the
column, slide table and workbench move on it. The exchange table
and knife storage manipulator are fixed on the bed body to ensure
the overall rigidity of the machine tool. In addition, the
structure of the machine tool is more reasonable through finite
element analysis in the design process.
Exhibition
FAQ
1. Can we pay by L/C or others ?
Yes ,you can make the payment by T/T , L/C etc.
2. What is your payment terms ?
30% down-payment after contract ,and 70% payment before shipment,
Meanwhite it can be discussed according to your situation.
3. What is your delivery time ?
The delivery depends on different machines with different
configurations. Please contact us to confirm it is in stock or not.
4. Do you have CE certificate?
Yes , we have CE certification, machine quality is guaranteed.
5. What is the warranty period ?
The warranty period is general 12 monthes after B/L date. During
the warranty period, we will provide free replacement parts (EXW)
which are easy damaged.
6. Can you send the service engineer to our company ?
When the machine arrive the destination, we timely send service
engineers to install machine according to buyer's schedule, the
buyer shall bear all expenses.
