Snowmobile steel made of simple boost snowmobile dolly
Description:
You can move the detection of snow from the garage to the outdoors.
Fortunately, the 2-inch PVC universal foot can easily achieve about
360°. Adjustable rope pulley belt, four steel trolleys, use for
rear trolleys. Binding the snowmobile to the snowmobile can easily
start the snowmobile. In order to push snowmobiles for plane
sliding. The floor area is small, storage space is saved, and the
cart is effortless. The snowmobile can be guaranteed when not in
use to ensure the product's use time.
| H Steel plate | 10"*8" |
| Flat plate | 8"*8" |
| Packing Weight | 15.76 LBS |
| Load Capacity | 1500LBS |
| Advantage | Portable, save storage space |
| Color | yellow |
| Material | steel |
| Usage | Help the snowmobile to move from the garage to the snow |
QA:
How do you tie the belt?
Answer:Pass the non-loop end of the strap through a slot on the top
edge of the cart. Then pass the non-loop end of the strap through
the loop end and tighten it. Then connect one end of the strap to
the cart. Put the snowmobile skis on the trolley. Put the strap on
the ski and pass it through another slot on the top edge of the
trolley. Pull tight and return to the top of the ski, then push the
Velcro pieces together.
Whats the best way to get your sled on this?
Each front ski one at a time first. If you pull upward on front of
ski you can slide them into place. Next place rear dooly next to
track at spot you want track to set upon it. Lift back straight up
high enough to clear rear dolly and move rear of sleds over dolly
and lower into place. Fairly simple to do.
Service:
If you have any questions about the products you have purchased,
you can consult our customer service. If you have any questions,
you are welcome to contact us online, email, or phone!
