Low Density , Good Specific Performance Magnesium Alloy Rod AZ31
AZ61
Magnesium alloys are the lightest structural metallic materials,
which makes them ideal within the aerospace industry. Magnesium
alloys have about ¼ the density of steels which also aids to
improving energy efficiency often seen in today’s automobile
manufacturing. Along with strength and ductility, Magnesium alloys
have excellent corrosion resistance.
Magnesium alloys, the lightest metal structure material for
engineering applications, have taken a great interest in the
automotive, aerospace, weapons, electronic and other fields,
because of their low density, high specific strength and stiffness,
good damping characteristics, as well as excellent castability.
Especially in the field of automobile industry, magnesium alloys
have replaced the steel, cast iron and even aluminum alloys
(Magnesium is the lightest of all structural metals, aluminum being
1.5 times heavier and steel being 4 times heavier), because they
can reduce the weight of vehicles, so that significantly contribute
to fuel economy and reducing CO2 emissions.
Our main products and capacities are as follows:
1. Magnesium tooling plate: Max. Thickness: 300mm; Max. Width:
3000mm; Max. Length: 6000mm
2. Magnesium alloy slab: Max. Size: 400 x 1000 x 2500mm
3. Magnesium alloy sheet: Min. Thickness: 0.5mm; Max. Width: 600mm;
Max. Length: 2000mm
4. Magnesium cast bar: Min. Diameter 90mm; Max. Diameter: 600mm;
Max. Length: 6000mm
5. Magnesium extrusions:
Round tube: Max. OD 600mmx thickness 125mm Square tube: 430 x 430mm
Flat bar: 920 x 160mm
U-Shape: 800 x 300mm Rectangular: 700 x 200mm
6. Magnesium alloy machined part according to customer’s design
7. Magnesium anode as per customer’s design
Magnesium Alloy functions
1. High mechanical stability
2. High damping capacity
3. Low internal stresses and distortions
4. Good heat conductivity
5. Good machining properties
What is round bar magnesium used for?
Round Bar Magnesium Magnesium is the third-most-commonly-used
structural metal, following iron and aluminum. The main
applications of magnesium are, in order: component of aluminum
alloys, in die-casting (alloyed with zinc), to remove sulfur in the
production of iron and steel, and the production of titanium in the
Kroll process.
| Hilbo magnesium alloy material Co., Ltd. |
| Quality Inspection Report |
| NO:JB/MS03-151-1236 |
| Model | Specifications | Process | Furnace No. | Chemical Composition (%) | Low power test |
| Al | Zn | Mn | Fe | Si | Cu | Ni | Mg | Low power | Surface quality | Size |
| Ø80*1000 | Extrussion | 9850 | 8.5 | 0.60 | 0.3 | 0.005 | 0.1 | 0.05 | 0.005 | Balance | OK | OK | OK |
|
AZ80A
H112 |
|
| Magnesium alloy bar | |
Tensile strength
Rm /Mpa | Yield strength 0.2%
Mpa | Elongation at break % |
|
| 295 | 190 | 5 |
| Conclusion :Passed inspection |
Feature:
Low density, good specific performance, good shock absorption
performance, good electrical and thermal conductivity, good process
performance, poor corrosion resistance, easy to oxidize and burn,
and poor heat resistance. Its processing and corrosion and
mechanical properties have many characteristics: fast heat
dissipation, light weight, good rigidity, certain corrosion
resistance and dimensional stability, impact resistance, wear
resistance, good attenuation performance and easy recycling; in
addition, there are high Features of thermal and electrical
conductivity, non-magnetic, good shielding and non-toxic.
Performance test data:
| No. | Model | Test condition | Dissolution rate
mg/(cm2*h)) | Strength of extension(MPa) | Yield strength(MPa) | Elongation
(%) | Hardness
(HB) |
| 1 | HB006 | 93℃/3%KCl | 50-70 | ≥370 | ≥260 | ≥2.5 | ≥90 |
| 2 | HB006A | 93℃/3%KCl | 50-70 | ≥310 | ≥220 | ≥6.0 | ≥75 |
| 3 | HB008 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥4.0 | ≥100 |
| 4 | HB008B | 93℃/3%KCl | 40-60 | ≥370 | ≥270 | ≥5 | ≥100 |
| 5 | HB008C | 93℃/3%KCl | 40-60 | ≥310 | ≥220 | ≥15 | ≥85 |
| 6 | HB012 | 93℃/3%KCl | 40-60 | ≥400 | ≥300 | ≥3.0 | ≥100 |
| 7 | HB011 | 93℃/3%KCl | 15-35 | ≥420 | ≥300 | ≥3.0 | ≥100 |
| 8 | HB016 | 93℃/3%KCl | 35-55 | ≥280 | ≥180 | ≥15 | ≥60 |
| 9 | HB017 | 93℃/3%KCl | 40-50 | ≥200 | ≥140 | ≥17 | ≥55 |
| 10 | HB018K | 50℃/0.84KCl | 50-70 | ≥240 | ≥170 | ≥12 | ≥55 |
| 11 | HB018 | 50℃/0.84KCl | 30-50 | ≥230 | ≥170 | ≥12 | ≥55 |
| 12 | HB010 | 93℃/3%KCl | 15-35 | ≥190 | ≥120 | ≥30 | ≥45 |
| 13 | HB022 | 43℃/0.05%KCl | 50-60 | ≥300 | ≥200 | ≥5.0 | ≥75 |
| 14 | HB023 | 43℃/0.05%KCl | 20-40 | ≥280 | ≥200 | ≥7.5 | ≥65 |
| 15 | HB024 | 43℃/0.05%KCl | 50-70 | ≥260 | ≥220 | ≥5 | ≥60 |
| 16 | HB013A | 43℃/0.05%KCl | 80-100 | ≥260 | ≥230 | ≥3.5 | ≥75 |
| 17 | HB025 | 50℃/0.84%KCl | 90-110 | ≥275 | ≥200 | ≥12 | ≥65 |
| 18 | HB026 | 93℃/3%KCl | 20-40 | ≥450 | ≥350 | ≥3.0 | ≥110 |
| 19 | HB808 | 50℃/0.84%KCl | 50-70 | ≥370 | ≥260 | ≥3.0 | ≥100 |
| 20 | HB019 | 50℃/0.84KCl | 45-65 | ≥230 | ≥180 | ≥12.0 | ≥55 |
| 21 | HB055 | 93℃/3%KCl | 130-150 | ≥220 | ≥160 | ≥12.0 | ≥55 |
| 22 | HB035 | 93℃/3%KCl | 50-100 | ≥100 | ≥60 | ≥42.0 | ≥35 |
| 23 | HBMM6 | 50℃/0.84%KCl | 70-100 | ≥260 | ≥230 | ≥10.0 | ≥60 |
| 24 | HBMM7 | 50℃/0.84%KCl | 90-120 | ≥270 | ≥240 | ≥9.0 | ≥65 |
| 25 | HBMM8 | 93℃/3%KCl | 100-150 | ≥280 | ≥250 | ≥5.0 | ≥65 |
Advantage of Hilbo Company:
Full range of product types, Ensure production capacity
We ave advanced die-casting, extrusion, forging, rolling, casting
processing production line and precision testing equipment. Can
produce a variety of types of magnesium alloy and magnesium alloy
products, and developed a high-strength magnesium alloy extruded
sheet. Through the purification of ordinary magnesium, magnesium
can be raised up to 99.99% of high purity.
Cost advantage
Magnesium alloy casting production can customized as your
requirement. the technical process is great, extrusion production
required for a variety of bar, no need to purchase from abroad,
extrusion molding products is easy molding, low energy consumption,
saving production costs.
Workshop:
Our product and technical advantages:
1. Professional&advanced magnesium alloy casting technology.
2. We increase the elongation of magnesium alloy plate much better.
3. We make the crystal size of magnesium alloy plate more uniform.
Testing Equipment
Our Services:
1. Small order quantity available
2. Professional engineering team and sales team
3. Payment: T/T & Western Union
4. OEM/ODM Supporttable
5. Free samples provided
6. Competitive price and high quality
Certificate:
We have attained ISO9001 and ISO14001 certificates, Standardize and
improve the enterprise quality management system.
