Fingerprint Verification High Pedestrian Traffic Flow
Bi-Directional Metro Station Flap Gate Turnstile
PRODUCT DESCRIPTION
Flap barrier automated turnstiles gate are an ideal solution for
the metro station, stadium, factory, or commercial
building. Flap barrier is well adopted in entrances and exits of
buildings or construction sites, to help to track staff
and visitors. Only authorized users are able to access specific
areas through the flap barrier automated turnstiles
gate. RFID, fingerprint verification, face recognition with
temperature check, and vein verification technologies are
available for options of flexibility.
Automatic flap barrier turnstile offers a reliable and efficient
method to ensure only authorized users are allowed
access to each area of a building. A direction indicator, showed
that pedestrian access to the current status of,
and guide pedestrian correct and smooth passage. The fingerprint
turnstile, which is high integrated for every access
control system, such as facial recognition device, fingerprints, QR
reader, RFID systems etc.
PRODUCT SPECIFICATIONS
Model | |
Size | 1200*300*1000mm |
Material | 1.2mm thickness SUS304 |
Pass Width | 600mm |
Passage direction | Single directional/Bi-directional |
Pass rate | 30-40 persons/minute |
Operating time | 1 seconds |
Power input | AC100-240V, 50/60HZ |
Working voltage | 24V |
Working humidity | 5%~95% |
Working temperature | -40℃~+70℃ |
Working environment | Indoor/outdoor |
Communication interface | RS485, Dry contact |
MAIN FEATUERS AND FUNCTIONS
1. Fault detection and alarm functions, easy to use and
maintenance.
2. The running status can be programmed and controlled with the
built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop
working automatically within the prescribed time and reset again
after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user
automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse
intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
