Lane Width 600 Mm Card Reader Integrate Entrance Retractable Flap
Barrier Gate
PRODUCT DESCRIPTION
Flap barrier offers a reliable and efficient method to ensure only
authorized users are allowed access to each area
of a building. A direction indicator showed that pedestrian access
to the current status of, and guide pedestrian correct
and smooth passage.
The flap barrier gate is high integrated for every access control
system, such as facial recognition with temperature check
device, fingerprints, QR code reader, RFID systems, etc.
Access control integration
We can provide OEM and ODM services. We also provide biometric
devices, such as IC/ID card reader, fingerprint
scanner, QR code scanner, face recognition camera, and so on.
Application
Sinomatic full automatic flap barrier gate are widely used in the
following sites:
- Banks, insurance companies
- Governmental and institutional establishments
- Office buildings, registered offices, administrative sites...
- Schools, universities and colleges
- Sensitive sites : military, nuclear, pharmaceutical, computer
centers...
- Airports
MAIN FUNCTION AND FEATURES
1. Fault detection and alarm functions, easy to use and
maintenance.
2. The running status can be programmed and controlled with the
built-in keyboard on the main board.
3. Mechanical anti-pinch function. If the gate meets resistance in
the reset process, motors will stop
working automatically within the prescribed time and reset again
after the default delay (till fully reset).
4. Anti-breakthrough function. The gate is locked automatically
until opening signal received.
5. Synchronization functions (for dual gate equipment).
6. Automatic reset function. Should the user fail to pass within
the prescribed time (default time is 5 seconds),
the system will cancel the authority of the current user
automatically.
7. Gate can be set as normally open or normally closed.
8. Can be used with variety of card readers: IC / ID card readers,
bar codes, fingerprints, etc. (Access controller needed).
9. Direction can be set as single-direction or bi-direction.
10. LED direction indicator.
11. Gate auto opens when power off and auto close when power on,
complying with fire safety requirements.
12. Alarm function, in case of illegal intrusion and reverse
intrusion, etc.
13. Counter function (optional).
14. Support infrared photocell for anti-pinch and reset function.
Specifications of Flap Barrier Gate
Item | Specification |
Power supply | AC220±10%V 50Hz/AC110±10% 60Hz |
Access device input voltage | Dry contact or 12V electrical level signal or > 100ms 12V impulse signal, driving current > 10mA |
Motor voltage | DC24V (brush motor) |
Max flow rate | 25 to 30 person per minute |
Flap opening / closing time | 1s |
Reset time when power on | 3s |
Working temperature | -20°C~60°C |
