Please contact us first before you place order.
The Salt Spray Test Chamber is applicable to the salt spray corrosive test for the
protection layer of components, parts,
electronic and electrical parts and metal materials and industrial
products.
It meets the following standards:
IEC60068-2-11 (GB/T2423.17), GB/T10125, GB/T1771, ISO9227, ASTM-B117, GB/T2423-18, QBT3826, QBT3827,
IEC 60068-2-52, ASTM-B368, MIL-STD-202, EIA-364-26, GJB150,
DIN50021-75,
ISO3768, ISO 9227, 3769, 3770; CNS 3627, 3885, 4159, 7669 etc.
| Model | Work Room Size (mm) | Exterior Size (mm) | Voltage | Power (KW) |
| YWX/Q-150 | 600x450x400 | 1100x750x930 | 1Phase/220V | 2 |
| YWX/Q-250 | 900x600x500 | 1500x900x1150 | 1Phase/220V | 2.5 |
| YWX/Q-750 | 1100x750x500 | 1700x1050x1150 | 1Phase/220V | 3.5 |
| YWX/Q-010 | 1200x800x500 | 1800x1100x1200 | 1Phase/220V | 3.5 |
| YWX/Q-016 | 1600x900x600 | 2300x1300x1300 | 1Phase/220V | 5 |
| YWX/Q-020 | 2000x1000x600 | 2700x1400x1500 | 3Phase/380V | 7.5 |
Specifications:
A waterproof structure is adopted between the chamber cover and
chamber body, thus there is no salt spray overflow.
• Adopts the tower spraying system and equipped with the salt
solution filter system and non-crystal nozzle so as to realize even
salt spray distribution and freely adjustable settlement.
• Working room temperature range:RT+5℃~50℃ (The setting value
cannot be lower than the current ambient temperature); Saturated
barrel temperature: +40°C~+63°C;
• Brine temperature: preheated by laboratory temperature;
Temperature uniformity: ≤ ±2°C; Temperature fluctuation: ≤ ±1°C;
• Test time: 0-99,999 M adjustable; Settlement: 1-2ml/80cm²/h;
• Spray method: NSS (neutral) test, AASS (acidic) test, CASS
(copper acceleration) test, custom test, programmable test, each
test can choose continuous spray or intermittent spray (according
to industry standards). The ratio of each test solution has a
corresponding explanation in the test setting interface.
• Sample holder: at an angle of 15 to 30 degrees from the vertical
surface (with sample standard placed). Other irregular samples are
recommended to remain tilted. The V-groove has a single weighing
capacity of 3KG, and the O-bar has a single bearing capacity of
5KG. It is strictly forbidden to place samples under heavy weight.
Company introduction
Ceritifications and honors
Production line machine
Company cooperative partners
