14" V Wire Wrap Johnson Water Well Sand Spiral Screen Tube For Heat
Pump
wedge wire screens, v shaped wire welded stainless steel water well
screens, low carbon galvanized water well screen, Johnson screen
tube, johnson screen pipe, johnson well screen, johnson wire
screen, johnson filter screen, johnson v wire screens,v wire slot
tube, wire wrapped screen pipe, oil well screens, dewatering well
screen, perfect roundness screen tube, profile wire screen pipe,
reverse rolled screen tube, spiral screen tube, screen cylinders,
rod based continous slot screens, sand conrol well screen, wire
wound screen pipe, stainless steel filter elements, wedge wire roll
screen, stainless steel strainer pipe,
Heat pumps are properly known as geothermal air conditioners. They
transfer heat into or out of the ground to cool or heat your home
by using a water well as a heat sink. The water well screen is a
key component of geothermal wells, keeping sand out of the water
pumping system
Features: V Wire Wrap Johnson Water Well Sand Spiral Screen Tube
1. Open Area Percentage
A high open area of more than 25% allows more water to flow easily
with less flow resistance. The low entrance velocity reduces
pressure drops, so less energy is needed for the pump.
2. Non-Clogging Slot
A vee-wire slot opening gets larger inwardly, reducing the chances
of clogging. Less sand in the water flow also means less abrasion
to the pump assembly, improving and extending the service life of
the geothermal well.
3. High Pressure Resistance
Wedge wire is welded in a circular manner to support the rods as a
single form, with no unappealing weld seams on the surface. A rigid
welded construction also allows the pipes and screens to withstand
a high water pressure.
4. Excellent Sand Control Performance
Precise slot control ensures an excellent filtration effect,
reducing the risk of wear on the pump.
5. Easy Installation
As it is lighter than the bridge slot screen and cement pipes,
Feiya-Xinlu's wedge wire well screen is easier and safer to
install.
6. Materials
We use galvanized low carbon steel, and stainless steel. Quality
materials do not retain impurities on the surface, providing a
maximum flow rate.
Applications of V Wire Wrap Johnson Water Well Sand Spiral Screen Tube
This product is specifically designed for geothermal air
conditioners for pumping water into and out of the ground.
Custom Solutions
Tell us your required specifications in regards to outside
diameter, slot size, length and open area percentage, and we will
produce wedge wire screens to fit those requirements and your
needs.
Order Information V Wire Wrap Johnson Water Well Sand Spiral Screen Tube
Screen materials: stainless steel, galvanized carbon steel, carbon
steel with plastic coating, or custom materials
Slot size: 0.1mm-15mm
Diameter (inches): 2,3,4,5,6,8,10,12,14,16,20. 29mm-1000mm
Length: 2.9m, 5.85m. The maximum length is 6.05m.
Connection method: beveled, circumferentially welded, or threaded
connections
Main Specifications V Wire Wrap Johnson Water Well Sand Spiral Screen Tube
| Outside Diameter | Inside Diameter | Slot Size | Percentage of Open Area | Length |
| 117mm | 104mm | 0.25-2mm | Above 11% | Up to 6.05m |
| 168mm | 156mm | 0.5-2mm | Above 14% | Up to 6.05m |
| 219mm | 205mm | 0.5-2mm | Above 14% | Up to 6.05m |
| 273mm | 259mm | 0.5-2mm | Above 14% | Up to 6.05m |
| 325mm | 307mm | 0.5-2mm | Above 14% | Up to 6.05m |
| 377mm | 359mm | 1.0-2mm | Above 25% | Up to 6.05m |
| 426mm | 408mm | 1.0-2mm | Above 25% | Up to 6.05m |
NOTE: Data is the above tale are subject to change without notice.
V Wire Wrap Johnson Sand Screen Pipe Specification
SIZE
(INCH) |
O.D (MM) |
SLOT (MM) |
LENGTH (M) |
COLLAPSE STRENGTH (BAR) |
TENSILE WEIGHT (TON) | WRAP WIRE (WIDTH*HEIGHT) (MM) | RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3x3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3x3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2x6.0 | 6.0MM/32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3x3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0x5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2x6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3x3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0x5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2x6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0x5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0x5.0 | 4.0MM/59 |
| PROFILE WIRE | | | | | | | | |
| WIDTH(mm) | 1.00 | 1.50 | 1.50 | 2.00 | 2.30 | 2.50 | 3.00 | 3.05 |
| HEIGHT(mm) | 2.00 | 2.00 | 2.50 | 3.80 | 3.50 | 4.00 | 4.60 | 6.35 |
| SUPPORT ROD | | | | | | ROUND |
| WIDTH(mm) | 1.80 | 2.00 | 2.50 | 3.00 | 3.00 | Ø2.5--Ø6mm |
| HEIGHT(mm) | 2.50 | 3.00 | 4.00 | 4.60 | 6.00 | ---- |
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass
production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to
arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
