12" Gap 1mm x L 3m V Wire Wrap Johnson Sand Screen Pipe For
Groundwater Solutions
wedge wire screens, v shaped wire welded stainless steel water well
screens, low carbon galvanized water well screen, Johnson screen
tube, johnson screen pipe, johnson well screen, johnson wire
screen, johnson filter screen, johnson v wire screens,v wire slot
tube, wire wrapped screen pipe, oil well screens, dewatering well
screen, perfect roundness screen tube, profile wire screen pipe,
reverse rolled screen tube, spiral screen tube, screen cylinders,
rod based continous slot screens, sand conrol well screen, wire
wound screen pipe, stainless steel filter elements, wedge wire roll
screen, stainless steel strainer pipe,
Water removal on construction sites is often required before
excavation can begin. This process is carried out to diver water
away from the soil where the building foundation will be placed,
keeping the area dry and solid. Xinlu’s water well screens are
widely used on drainage pipes in construction sites to filter out
sand from the water, and improve the water removal efficiency.
V Wire Wrap Johnson Sand Screen Pipe is an important equipment in
oil drilling operation and is often used in early completion or oil
production and sand control. Its main function is to screen out
small stones or gravels in the oil, to ensure the purity of the oil
as much as possible.
Wedge wires used in the sand screen forms a v-shaped opening
between the slots of the screen, thereby ensuring the smoothness of
oil-water filtration. Wedge wires are continuously wrapped on the
pipe to form a continuous high-density uniform gap, which ensures
the open area of the screen and its non-blocking property, and
avoids high-density accumulation of sediment, relatively improves
the production efficiency and prolongs the pump inspection cycle of
the oil well
V Wire Wrap Johnson Sand Screen Pipe BENEFITS
High mechanical strength
Superior corrosion and erosion resistance
Large open flow area
Self-cleaning function lowering the risk of plugging
High flow rate with low pressure drop
V Wire Wrap Johnson Sand Screen Pipe APPLICATION
Sand screen is a commonly used method to control, mitigate and
prevent sand production in wellbores
and extend the service life of wellbores. It is highly recommended
in the following situations:
V Wire Wrap Johnson Sand Screen Pipe SPECIFICATIONS
Outside Diameter: 4", 6", 8", 10" and 12" (20–300 mm).
Slot: 0.1–35 mm
Standard Length: 50–6000 mm
Wedge Wire: 2.2 × 3.0 mm, 2.3 × 3.0 mm, 3.0 × 4.6 mm, 3.0 × 5.0 mm,
etc.
Number of support rods: 22, 32, 48, 50
End connection: thread connection, flange connection and baffle
ring connection
Customer Service: Custom well screens
Inform us of your specifications for the water well screen,
including diameter, slot opening size, length and percentage of
open area. Based on that information, we can customized your
products.
Technical Specs of V Wire Wrap Johnson Sand Screen Pipe
| Outside Diameter | Inside Diameter | Slot Opening Size | Percentage of Open Area | Length |
| 6inch (168mm) | 156mm | 0.5, 0.75, 1.0, 1.5 | Above 6% | 2.9m, 5.8m |
| 8inch (219mm) | 203mm | 0.5, 0.75, 1.0, 1.5 | Above 9% | 2.9m, 5.8m |
| 10inch (273mm) | 256mm | 0.5, 0.75, 1.0, 1.5 | Above 9% | 2.9m, 5.8m |
| 12inch (325mm) | 305mm | 0.5, 0.75, 1.0, 1.5 | Above 9% | 2.9m, 5.8m |
V Wire Wrap Johnson Sand Screen Pipe Specification
SIZE
(INCH) |
O.D (MM) |
SLOT (MM) |
LENGTH (M) |
COLLAPSE STRENGTH (BAR) |
TENSILE WEIGHT (TON) | WRAP WIRE (WIDTH*HEIGHT) (MM) | RODS (MM) |
| 3-1/2 | 88.9 | 1.0 | 3 | >22 | 10.2 | 2.3x3.5 | 3.8MM/22 |
| 4-1/2 | 114.3 | 1.0 | 3 | >28 | 11.5 | 2.3x3.5 | 3.8MM/22 |
| 6-5/8 | 168.3 | 0.75 | 5.8 | >40 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 1.0 | 5.8 | >33 | 12.8 | 2.3x3.5 | 3.8MM/32 |
| 6-5/8 | 168.3 | 0.63 | 5.8 | >83 | 45 | 3.2x6.0 | 6.0MM/32 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >34 | 21.9 | 2.3x3.5 | 3.8MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >50 | 38.2 | 3.0x5.0 | 4.0MM/48 |
| 8-5/8 | 219.1 | 1.0 | 5.8 | >60 | 46 | 3.2x6.0 | 5.0MM/48 |
| 10-3/4 | 273.1 | 0.75 | 5.8 | >50 | 32.9 | 2.3x3.5 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >60 | 39.5 | 3.0x5.0 | 4.9MM/55 |
| 10-3/4 | 273.1 | 1.0 | 5.8 | >100 | 48 | 3.2x6.0 | 5.0MM/55 |
| 12-3/4 | 323.9 | 1.0 | 5.8 | >120 | 37.2 | 3.0x5.0 | 4.0MM/50 |
| 14 | 355.6 | 1.0 | 3 | >80 | 37.8 | 3.0x5.0 | 4.0MM/59 |
| PROFILE WIRE | | | | | | | | |
| WIDTH(mm) | 1.00 | 1.50 | 1.50 | 2.00 | 2.30 | 2.50 | 3.00 | 3.05 |
| HEIGHT(mm) | 2.00 | 2.00 | 2.50 | 3.80 | 3.50 | 4.00 | 4.60 | 6.35 |
| SUPPORT ROD | | | | | | ROUND |
| WIDTH(mm) | 1.80 | 2.00 | 2.50 | 3.00 | 3.00 | Ø2.5--Ø6mm |
| HEIGHT(mm) | 2.50 | 3.00 | 4.00 | 4.60 | 6.00 | ---- |
Benefits of V Wire Wrap Johnson Sand Screen Pipe
1. Maximum Flow Rate
The slots are arranged in a uniform pattern, allowing water to
enter the screen directly from all directions of the water bearing
area.
2. Excellent Sand Control Performance
Traditional perforated tubes have holes large than 1 cm, which do
not keep sand out. Scratches and corrosion on the outer wrap layers
leads to more sand, gravel and clay entering the well pipe, which
in turn leads to clogging. However, the wedge wire screen has slot
openings between 0.5mm and 1.5mm, keeping most sand and abrasive
particles out.
3. Long Well Life
Each wedge wire screen undergoes anti-corrosion treatments,
rendering it less prone to rust or encrustation.
4. Easy Installation
Wedge wire screens are lighter than cast iron pipes or perforated
tubes, making them easier to install.
5. Standard Length
The standard length of each wedge wire screen is 3.2m. Pup joints
can be added upon request.
6. Connection Method
Welded, threaded, and flanged connections are available.
Applications for the Wedge Wire Screen
This screen is applicable in vertical wells, deviated wells,
directional wells, and others that require sand control.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed
samples are acceptable.
Q2. What about the lead time?
A: 3-5 days for Sample preparing , 15-25 working days for mass
production.
Q3. Do you have any MOQ limit for the order?
A: Low MOQ, 3pc for sample checking is available.
Q4. How do you ship the goods and how long does it take to arrive?
A: Airline, sea shipping and rail transportation are all optional.
Or ship by EMS, DHL, UPS, FedEx or TNT, it takes 5-7 days to
arrive.
Q5. How to proceed an order?
A: Firstly let us know your need specification or application.
Secondly We quote according to your requirements or our
suggestions.
Thirdly customer confirms and places deposit for formal order.
Fourthly We arrange the production.
Q6. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
