Jekit GT6 brake with 362*32mm aluminum rotor for E90 front rim 19
| Item Name | GT6 brake kit |
| Pots | 6 pistons |
| Caliper color | Red/Yellow/Black/Blue/custom color |
| Weight | About 36kg/set |
| Bell and bracket color | Red/Yellow/Black/Blue/custom color |
| Bell type | Regular/flower/floating/custom |
| Material | 6061/7075 Aluminum,Grey cast iron 250 |
| Size | 330*32/355*32/362*32/380*32/380*34mm |
| Disc type | J hook/Drilled/Grooved/Slot straight lines/custom disc type |
| For Wheel size | Rim18/19/20/21 inch |
| Full set included | 1 pair brake caliper/1 pair brake disc with center cap and bracket/
1 pair brake line/1 set brake pads
|
What do you usually do for brake maintenance?
The items that need to be done for brake maintenance are:
1. High temperature protection of the car pad;
2. Lubrication and maintenance of brake cylinder;
3. Brake disc cleaning;
4. Brake fluid replacement;
5. Rust prevention and lubrication of contact surfaces of tire
screws, brake discs and steel rings.
1. High temperature protection of the car pad;
Prevent the corrosion of the brake system, prevent the brake pad
from biting due to the high-temperature surface, eliminate the
brake pad scream, and maintain good lubrication durability. The
product with ceramic composition shall be resistant to high
temperature of more than 1400 ℃. Therefore, regularly check the
thickness of brake pads or brake shoes. When the thickness is found
to be close to or less than the minimum thickness specified by the
manufacturer, it shall be replaced immediately
2. Lubrication and maintenance of brake cylinder
Lubricate the movable shaft and cup of the brake wheel cylinder,
keep the wheel cylinder bushing soft and prolong the service life
of the wheel cylinder. It is necessary to use fully synthetic brake
wheel cylinder lubricating oil
3. Brake disc cleaning
Quickly clean the oil stain, dirt and friction dust of the brake
disc, brake drum and any parts to keep the brake disc cool;
Eliminate the harsh noise of braking and promote uniform braking.
4. Brake fluid replacement;
Brake oil has water absorption characteristics. If it is not
replaced for a long time, it will corrode the braking system and
bring hidden dangers to driving. Generally, it is recommended that
the owner replace the brake oil every 20000 km. Mainly to ensure
the cleanliness of brake oil.
5. Rust prevention and lubrication of contact surfaces of tire
screws, brake discs and steel rings.
Prevent corrosion, prevent screws and surfaces from being bitten by
heat, and facilitate disassembly. Aluminum containing products with
high temperature resistance of more than 1100 degrees are required
to ensure the contact area with brake pads and improve braking
force.
