600A JP Integrated Optical Distribution Cabinet Reactive Power Metering IP54

JP Reactive Power Metering Comprehensive Distribution Cabinet

Application

ZM-JP comprehensive distribution panel is suitable for urban and suburban electric network, AC 50Hz, rated voltage 400V, rated current 600A and below as to distribute energy, control, compensate and protect for motor, illuminating, and distribution equipment and etc. This panel is developed from the network innovation for safe, economic, reasonable, secure operation, it is the comprehensive panel integrated with power distribution and reactive power ompensation. The panel has such advantages as high breaking capacity, good thermal stability, agile layout, practice, new structure, high protective degree (IP33), it is the new products in replace of old generation.

ZM-JP panel meet with standard of JB/DQ6141-86 Low voltage reactive power compensation device

Model and implication

Main Characteristics

• Basic electric data
• Rated voltage 400V
• Rated current 50-600A
• Rated frequency 50Hz
• Leakage relay
• Rated leakage tripping current: 300mA
• Rated pulse tripping current: 50mA
• Rated breaking time: < 0.2s
• Time of re-closing: 20-60s
• Capacitor compensation
• Auto compensation: 30-60% rated capacity of transformer
• The metering device uses DD450 single phase KWH meter or DT450 3P KWH meter and 0.5s class CT with RS485 port.

Working condition

• Ambient temperature: from 25℃ to 40℃, daily average: <35℃
• Altitude not more than 2000m
• Daily average humidity: <95%
• Installation inclined angle within 5o
• The mounting site shall have no severe vibration and impact

Structure

The panel made of cold rolled steel plate with enough strength and rigidity, and can withstand the force come from short circuit.

Power source directly enter into metering compartment and separated from other parts, if closing rear door of the metering compartment, there.

can be Pb sealed to avoid electric theft.

In consideration of temperature rise, the panel upside has ventilating hole, and downside has shutter, these will form air convection to cooling.

The surface is epoxy dust painted, up to Ip33.

This panel is designed for outdoor use as well, rain proof.