Transformer Making Equipment Vacuum Pressure Impregnation
Description of vacuum pressure impregnation THY-Z03
1. Support the top cover with 50KG hydraulic rod. The top cover is
sealed with silicone rubber and the cover is quickly clamped.
2. Adopting stepper motor drive precision ball screw with moving
slot lifting type impregnation, preset lifting height (maximum
stroke of sub-slot 60mm; displacement accuracy ±0.05mm)
3. The screw jack has high bearing capacity and high control
precision. The PIN will not stick to the varnish, and there is no
need for secondary tin plating.
4, PLC controller control, can be preset a variety of impregnation
mode, with timely, appropriate elimination of bubble function;
5, automatic switch box cover, secondary automatic vacuum, save time
and effort, environmental protection, energy saving, can achieve
single-person multi-machine operation.
6. The whole groove is made of 10MM steel plate. Double glass
observation window for viewing immersion at any time
7. Impregnation time can be set; with timing alarm, motor overload
protection and phase loss protection function; exhaust filter
recovery, with environmental protection, recycling double-effect
function;
8. The product is stored up to 500, and the vacuum is intelligently
pumped to achieve no bubbles and the impregnation effect is
beautiful.
Dimensions of vacuum pressure impregnation THY-Z03
Internal dimensions of the box:L705*W540*H300mm
product tray :220*640*30mm
Lifting plate (to lift the varnish):L675*W515*H105mm
Single cylinder size:L950*W660*H1160mm
Control box size:L500*W540*H1300mm
take up space: L2600x W660x H1300mm
Dipping varnish height: 80mm (the height can be customized
according to customer requirements)
