Copper Wire Winder Lathe Transformer Automatic Coil Winding Machine
Introduction of automatic coil winding machine ZPX2500
Wire winder lathe transformer automatic coil winding machine
ZPX2500, adopting automatic wire laying and tension technologies,
is especially suitable for winding different shapes of coils. These
coils can be used in transformers, reactors and other similar
products. The automatic coil winding machine is provided with main
winding motor, automatic wire laying unit, layer insulation unit,
pneumatic system, PLC based control system, and servo motors, etc.
The automatic coil winding machine features slow starting, smooth
running, high automation, full functions, and strong pulling force,
etc.
Main Components of automatic coil winding machine
1. Main frame
2. Winding unit
3. Automatic wire laying unit
4. Insulation decoiler
5. Electronic control system
6. Pneumatic system
Technical Parameters of automatic coil winding machine
Typical standard specifications of automatic coil winding machine ZPX2500 are shown below, however these can be easily modified as requested.
| Height of the chuck to ground: | 1000mm |
| Shaft Size: | 50x50x1500mm |
| Insulation Decoiler Number: | 1 pc |
| Winding Power: | 7.5Kw |
| Winding Speed: | 0-200 Rpm |
| Tailstock Moving Range: | 800-2500mm |
| Speed Regulation: | stepless speed regulation |
| Round Wire Diameter: | 0.3-4.0mm |
| Max Finished Coil Height: | 2500mm |
| Max. Rotating Diameter: | 800mm |
| Max. Coil Weight: | 500kg |
| Automatic Wire Laying: | Min. Spread pitch: 0.01mm |
| Counting Mode: | 5-digit counting |
| Max. Turns Preset Number: | 9999.9 |
| Counting Range: | 0 - 9999.9 |
Fig 1: Automatic coil winding machine ZPX2500's full view
Fig 2: Automatic coil winding machine ZPX2500's side view
