20 Meter Wireless Remote Control Distance Vertical Lifting Type
Parking Lock Device
PRODUCT DESCRIPTION
The remote control parking lock can protect your parking space from
occupying. When the owners drive their cars to the parking, they
can just press remote controller and the parking lock will
automatically go down and the owner can park their cars in. When
they leave, they press the remote controller and the parking lock
will rise up and no one can park in the parking space. It changed
the traditional way to get off the manual switch.It is easy to
master technology with high quality of life.
TECHNICAL SPECIFICATIONS
| Weight resistance | ≤5 ton |
| Dimension | 640*160*320mm |
| Up height | 320mm |
| Down height | 110mm |
| Outdoor Protection | IP66 |
| Finish | Spraying plastic coating |
| Material | 2.00mm steel rolling |
| Up and down time | 5s -6s |
| Remote distance | ≤20m |
| Lead Acid Battery | About 3 months on a charge |
| Input voltage | DC 12V or AC110/220V |
| Working power | DC12V 7AH |
| Static Current(mA) | ≤0.85Ah |
| Environment Temperature | -40~+70 °c |
| Package dimension | 700*200*110mm (1 set in a carton) |
| Weight | G.W (13KG) / N.W (12.4KG) |
| Humidity | 10%-95% |
MAIN FUNCTION AND FEATURES
1. Protect your parking place from being occupied. Easy to use
2. Battery charge for one time can use for about 3 months.
3. Circuit protection: with reliable MCU and IC circuit intelligent
control
4. Durable: Bearing weight up to 5 tons, the heavy weight loading
on it , it won't be out of shape and destroyed
5. Waterproof,rustproof
6. Reset function: when go down or go up, meet the resistance from
the outside force, it 'll reset itself, going to the
original way, so that protect the control panel's function
7. Noise-free: bearing transmission design of the motor makes
almost zero noise. It is beneficial for battery and motor
longevity and lesser friction
8. Theft-proof: the mounting bolts are installed inside of the
cabinet. No one can open it without key
9. Easy installation: four prepared holes at the bottom of the
cabinet makes it easy to install.parking lot
10. Manual operation: to operate the parking locks rising and going
down manually with manual at emergency situation.
11. Alarm function: when overloading, over voltage and coming
across hamper
12. Feasibility: suitable for all parking place and all kinds of
car.
Pack List
1 x SN-BW-3 unit
1 x Charger
2 x Remote Controls
4 x Tamper-proof bolts 50mm
2 x Keys for control box
1 x Operation Manual
Operation
1. On the remote control, press the up square button to make the
Parking Lock stand up. Press the bottom button
to make it lie flat.
2. When the battery is low on charge, an audible alarm will sound
on the unit or it will not operate. Open the control
box with the key and unplug the plug from the socket by pushing the
release. After removing the flat battery, connect
it to the re-charger (supplied). This must be plugged into 220/240
volt power. After 12 hours the battery will be fully
re-charged ready for operation.
3. When the battery is fully charged, the expected use is 300
operations or approx. 3 months assuming 2 lifts and 2
downs per day.
4. In case of an emergency and the unit is standing up and will not
operate, use the hex key (supplied, it’s a good idea
to leave this key and key of the main box in your car), to open the
main box and to undo the screw. The pin will then
be released. Remove the pin and lay the whole unit down.
